Engineering Calculators and Unit Converters: All 63 Tech Inc. Tools in One Place

Free calculators and converters for the numbers membrane laboratories, filtration engineers, sampling and analyser teams, reactor and core-analysis labs and plant engineers work out every day. Each tool shows the equations it uses, a worked example and its limits, and links to the guide and the equipment behind it. New tools are added to this page as the series grows.
Water, RO and NF
Osmotic pressure calculator: van 't Hoff equation for salts and sugars, in bar, psi, kPa and atm.
RO recovery, rejection and concentrate calculator: recovery, rejection, concentrate quality and a mass balance check.
Water and salt permeability (A, B) calculator: solution-diffusion coefficients from a bench test.
Concentration polarisation calculator: polarisation factor and true rejection.
SDI calculator: SDI and plugging from your test times, with the 75% check.
Conductivity, TDS and NaCl converter: with ionic strength and osmotic pressure.
Forward osmosis flux calculator: Jw, reverse salt flux and Js/Jw.
Flux, fouling and cleaning
Membrane flux and permeability calculator: LMH, GFD, LMH/bar and GFD/psi from a timed volume.
Flux temperature correction calculator: correct flux to 20 or 25 °C.
Normalised water permeability (NWP) calculator: for TFF cassettes and modules, with NWP recovery.
Flux recovery ratio and fouling resistance calculator: FRR, reversible and irreversible fouling, resistance-in-series.
Cross-flow velocity calculator: velocity, Reynolds number and wall shear for channels, spacers, tubes and fibres.
Membrane CIP chemical dilution calculator: stock caustic, hypochlorite or acid for a target concentration.
Membrane unit converter: flux, permeability and pressure units.
Pores, structure and materials
Bubble point and pore size calculator: pressure to largest pore diameter and back.
MWCO to pore size calculator: Stokes radius and equivalent pore diameter from molecular weight.
Porosity, tortuosity and mean pore radius calculator: gravimetric porosity and the GEF pore radius.
Hagen–Poiseuille pore flux calculator: flux from pore structure, or pore size from flux.
Surface free energy (OWRK) calculator: dispersive and polar components from two contact angles.
Membrane tensile test calculator: strength, elongation at break and modulus.
Membrane module area calculator: hollow-fibre and spiral-wound area, packing density and velocities.
Gases, pervaporation and membrane distillation
Gas permeance and permeability converter: GPU, Barrer, SI and ideal selectivity.
Time-lag gas permeation calculator: permeability, diffusivity and solubility from one run.
Gas separation membrane calculator: permeate purity and recovery from selectivity, pressure ratio and stage cut.
Pervaporation calculator: flux, separation factor and PSI.
Membrane distillation calculator: vapour pressure driving force and flux.
Filtration and process
TFF concentration and diafiltration calculator: concentration factor, diavolumes, yield, time and area.
Vmax filter sizing calculator: filterability test to production filter area.
Oil and gas sampling, analysers and chemical injection
Sample cylinder fill and outage calculator: 80% fill, sample mass, outage tube length and the liquid-full check at the hottest temperature.
Sample line lag time and purge calculator: line volume, transport lag and purge time for gas at line pressure or liquid.
Sample cooler duty calculator: heat load, cooling water flow, LMTD and area for SWAS and process sample coolers.
Instrument tubing pressure drop calculator: velocity, Reynolds number and ΔP in 1/4", 3/8", 1/2" and metric tubing.
Gas cylinder contents and run-time calculator: Nm³, kg and hours from water capacity, pressure and flow, with a real-gas correction.
RVP to TVP calculator: true vapour pressure of gasoline, naphtha and crude at any temperature (AP-42).
Chemical injection dosing calculator: ppm dose to L/h and gal/day, pump setting and day-tank autonomy.
Transformer oil DGA calculator: Duval Triangle 1, IEC 60599 ratios, Rogers ratios, CO₂/CO and the TDCG condition.
Gas hydrate formation temperature and inhibitor calculator: hydrate temperature from gas gravity and pressure, subcooling, methanol or MEG dosing.
Relief valve sizing calculator (API 520 method): preliminary orifice area for gas, steam and liquid, with the API 526 letter.
Restriction orifice sizing calculator: bore from flow or flow from bore, liquid and choked or subcritical gas.
Reactors and catalysis
Space velocity calculator: GHSV, WHSV, LHSV, residence time and Ergun bed pressure drop for fixed-bed tests.
Autoclave gas charge and hydrogen uptake calculator: moles charged, hot pressure and conversion from the pressure drop.
Filtration and lubrication
ISO 4406 cleanliness code and beta ratio calculator: particle counts to the three-number code; filter β ratio and efficiency.
Lube oil viscosity calculator: viscosity at any temperature (ASTM D341), ISO VG grade, viscosity index and blending.
Carman–Kozeny packed bed calculator: permeability and pressure drop of beds, cakes and sintered media.
Settling velocity calculator: Stokes to Newton terminal velocity and Richardson–Zaki hindered settling.
Tank and CIP heat-up time calculator: steam coil, jacket or electric heater, with losses and steam used.
Carbon capture and hydrogen
Adsorbent breakthrough capacity calculator: dynamic and saturation capacity, bed utilisation and mass-transfer zone.
CO₂ capture rate and solvent circulation calculator: capture efficiency, tonnes captured, amine circulation and reboiler duty.
Electrolyser hydrogen production and storage calculator: Faraday output, kWh/kg, LHV efficiency and compressed storage.
Core analysis and materials
Core permeability and porosity calculator: Darcy, Klinkenberg correction and helium (Boyle's-law) porosity.
Triaxial Mohr–Coulomb calculator: cohesion, friction angle, UCS and failure plane from confined strengths.
BET surface area and skeletal density calculator: multipoint BET with C constant and Rouquerol check; pycnometer density.
Hydrometallurgy and ion exchange
Electrowinning calculator: Faraday metal yield, current density, kWh per tonne and cells for a target production.
Leach pulp density and residence time calculator: percent solids, pulp SG, slurry flow, reagent and tank residence time.
Ion exchange bed volume and cycle calculator: resin volume, BV/h, run length, regenerant and rinse per cycle.
Unit converters
Membrane unit converter: flux, permeability and pressure units (LMH, GFD, LMH/bar, GFD/psi).
Gas permeance and permeability converter: GPU, Barrer, SI and ideal selectivity.
Conductivity, TDS and NaCl converter: with ionic strength and osmotic pressure.
Permeability unit converter: darcy, mD, m², µm² and hydraulic conductivity of water.
Water hardness unit converter: mg/L as CaCO₃, meq/L, °dH, °fH, °Clark and grains per gallon.
Viscosity unit converter: cSt, cP, mm²/s, Pa·s, SUS, poise and reyn.
Gas flow unit converter: Nm³/h, Sm³/h, SCFM, SLPM, MMscfd, kg/h and actual flow.
Liquid flow unit converter: bbl/d, m³/h, gpm, L/min, kg/h and line velocity from API gravity.
Pressure unit converter: gauge, absolute and vacuum in bar, psi, kPa, kg/cm², mmHg and head.
Dew point and moisture converter: dew point at line pressure to ppmv, lb/MMscf and mg/Nm³.
Gas concentration converter: ppm to mg/Nm³, mg/Sm³, lb/MMscf and grains per 100 scf.
The equipment behind the numbers
Tech Inc. builds the test systems these calculations come from: RO and NF testing systems, test cells, SDI analysers, capillary flow porometers, contact angle instruments, gas separation test systems, pervaporation and membrane distillation testing systems. Our sampling systems, chemical injection systems, high-pressure reactors, lubrication stations, core analysis instruments, surface area and density analysers and hydrometallurgy equipment stand behind the newer tools. The standards many of these tools implement are explained in our standards and certifications guide. Send your test requirements to mail@techincresearch.com.
Write to mail@techincresearch.com or call +1 (289) 622-1032.
Disclaimer: these calculators give estimates from simplified, published equations and the values you enter, for general information only and without warranty. They are not engineering, design, safety or regulatory advice and are no substitute for measurement, the equipment or chemical maker's instructions, the applicable standards or the judgement of a qualified engineer. Do not rely on them for safety-critical decisions. Tech Inc. accepts no liability for loss, damage or injury arising from their use. Equipment specifications are typical and may change. See our product information disclaimer and terms of use.





Comments