Membrane Unit Converter: LMH to GFD, LMH/bar to GFD/psi, bar to psi and More

Membrane data arrive in mixed units: LMH from one lab, GFD from a datasheet, psi from a gauge. Pick the quantity, enter a value and its unit, and the converter lists it in every other unit.
The units
Flux: LMH (L/m²·h), GFD (US gal/ft²·day), m/s, µm/s, m³/m²·day, L/m²·day. 1 GFD ≈ 1.698 LMH.
Permeability: LMH/bar, GFD/psi, LMH/psi, m/(s·Pa).
Pressure: bar, psi, kPa, MPa, atm, mmHg, cmHg, metres and inches of water. 1 bar ≈ 14.504 psi.
Conversion factors follow the NIST guide to SI units (US gallon 3.785412 L; square foot 0.09290304 m²; psi 6,894.757 Pa; standard atmosphere 101,325 Pa).
Related tools
Flux and permeability calculator · Gas permeance converter (GPU, Barrer) · All membrane calculators and converters.
Related tools: Membrane flux and permeability, Pressure units (gauge/absolute), Gas permeance converter, Flux temperature correction. All 57 calculators and converters.
Write to mail@techincresearch.com or call +1 (289) 622-1032.
Disclaimer: this calculator and article give estimates from simplified, published equations and the values you enter, for general information only and without warranty. They are not engineering, design, safety or regulatory advice and are no substitute for measurement, the equipment or chemical maker's instructions, the applicable standards or the judgement of a qualified engineer. Do not rely on them for safety-critical decisions. Tech Inc. accepts no liability for loss, damage or injury arising from their use. Equipment specifications are typical and may change; results depend on the membranes and conditions, how the equipment is used and operation in line with the operation manual.





Comments