top of page
< Back

Membrane Making Equipment

Home › Products › Membrane & Filtration › Membrane Making Equipment

Complete membrane fabrication equipment.

How to choose membrane making equipment

Flat sheet or hollow fibre. Flat sheet casting is the simpler place to start and needs less polymer solution per trial; hollow fibre spinning gives the format used in most UF, MBR and gas separation modules.

Lab or continuous. Lab casters and single-line spinners suit formulation screening; continuous lines with unwind, coagulation, rinse and take-up make lengths for module trials.

Polymer and solvent. PES, PSf, PVDF, PAN and cellulose acetate dissolved in NMP, DMAc or DMF are the usual systems. Wetted parts and seals must suit the solvent, and the work area needs fume extraction.

Process control. Blade gap or spinneret size, line speed, bath temperature, evaporation time and humidity decide the membrane structure, so each should be set and recorded.

What to send for a quotation

The membrane format, polymer and solvent system, target thickness or fibre dimensions, sheet width or fibre length, output per day, bath temperature control and any data logging you need.

Read: Membrane casting: methods and parameters · Hollow fibre membranes: structure and manufacture

Frequently asked questions

Is phase inversion the only way to make a membrane?
No. Non-solvent induced phase separation (NIPS) is the most common, but vapour induced (VIPS) and thermally induced (TIPS, often used for PVDF) phase separation are also used, and electrospinning makes nanofibre mats.

Can one machine run several polymers?
Yes, provided the wetted parts and seals are compatible with every solvent and the machine is cleaned between formulations.

Request a quotationWhatsApp an engineerRequest a test certificate

Browse the range (2)

WHY TECH INC.

One partner from specification to commissioning

✓  Part of an engineering group founded in 1990

✓  Trusted by universities and R&D laboratories worldwide

✓  Equipment supplied to national oil companies and refineries

✓  Offices in Canada, India, Estonia and Saudi Arabia

You share the process data and the duty. We do the engineering homework, build the system in our own facilities and prove it on the test bench before it ships, so your team can focus on results.

INSIGHTS

AI and your process data

AI in Membrane Research: Why Consistent Lab Data Decides the Result →

 

Need it built to your specification?

Every Tech Inc. system is engineered to your process data, P&ID and standards, then built and factory-tested in our own facilities in Chennai, India, with full documentation. Send your specification to mail@techincresearch.com for a P&ID, GA drawing and quotation.

Request a quotationWhatsApp an engineer

bottom of page