top of page
< Back

Nanofiltration Test Cells

Home › Products › Membrane & Filtration › Nanofiltration Test Cells

Specialized nanofiltration test cells for membrane evaluation. Compact laboratory platform for NF research.

Tech Inc. nanofiltration test cells are engineered for precise evaluation of nanofiltration membranes at moderate pressures, for softening, colour removal and organic contaminant reduction studies. Tech Inc. is part of an engineering group founded in 1990.

How to choose a nanofiltration test cell

Configuration. Dead-end stirred cells suit quick screening of small volumes; crossflow cells reproduce flow along the membrane as in a module.

Pressure rating. NF typically runs at about 5 to 40 bar; choose a rating above your highest test pressure with a margin.

Membrane area and sealing. A larger active area gives more permeate and steadier readings; O-rings and the cell body must suit the feed chemistry.

Salt and organic rejection. NF tests often use MgSO4, NaCl or dye solutions; conductivity or UV analysis of permeate gives rejection.

What to send for a quotation

Membrane coupon size, test solutions, maximum pressure and temperature, crossflow velocity and whether the cell must be solvent resistant.

Frequently asked questions

Which salts are used to test NF membranes?
MgSO4 and NaCl are the usual pair: NF membranes reject divalent MgSO4 strongly and monovalent NaCl much less.

Can NF cells test organic solvents?
Yes, if the cell body, seals and spacers are chosen for the solvent; tell us the solvent at enquiry stage.

Request a quotationWhatsApp an engineerRequest a test certificate

Related products and ranges (3)

WHY TECH INC.

One partner from specification to commissioning

✓  Part of an engineering group founded in 1990

✓  Trusted by universities and R&D laboratories worldwide

✓  Equipment supplied to national oil companies and refineries

✓  Offices in Canada, India, Estonia and Saudi Arabia

You share the process data and the duty. We do the engineering homework, build the system in our own facilities and prove it on the test bench before it ships, so your team can focus on results.

INSIGHTS

AI and your process data

AI in Membrane Research: Why Consistent Lab Data Decides the Result →

 

Need it built to your specification?

Every Tech Inc. system is engineered to your process data, P&ID and standards, then built and factory-tested in our own facilities in Chennai, India, with full documentation. Send your specification to mail@techincresearch.com for a P&ID, GA drawing and quotation.

Request a quotationWhatsApp an engineer

bottom of page