top of page

Contract Research and Development with Tech Inc.

Writer: Tech Inc
Tech Inc
10 hours ago
3 min read

At a glance. Tech Inc. builds research equipment, and it also does research for clients. Companies, start-ups, universities and government laboratories across the world send us a question, a material or a feed, and we return data, samples and a report. The work runs on the same casting, spinning, testing and analysis equipment that we design and build, operated by the engineers who designed it.

Why we are well suited to contract research

  • A global team. Our engineers and scientists come from across the world, with degrees from Ivy League universities, Stanford and the Indian Institutes of Technology (IITs). They have worked on membranes, polymers, oil and gas, water and new energy, so a project gets chemistry, process and mechanical engineering under one roof.

  • We own the equipment. Membrane casting and spinning machines, test cells, pilot skids and characterisation instruments are our own products. We can modify a rig in our workshop instead of waiting for a supplier, and we know each instrument's limits because we built it.

  • Research is our home ground. Machines, membranes and polymers from Tech Inc. and its sister company Davey Products appear in peer-reviewed studies from universities in India, Australia, Malaysia, Poland, Spain, Iran, Thailand and South Africa.

  • From result to plant. When a study succeeds, the same team can design and build the pilot plant or production equipment that follows. The data you paid for goes straight into an engineering design.

What we do

Membrane and materials development

  • Polymer dope formulation and screening, including additives and solvents

  • Flat sheet casting by phase inversion, from lab coupons to roll-to-roll samples

  • Hollow fibre spinning on laboratory and pilot lines, including composite and coated fibres

  • Thin film composite coatings, dip and spin coatings, and electrospun nanofibre layers

  • Small batches of membranes and modules for your own evaluation

Process feasibility and pilot testing

  • Bench and pilot tests on your feed for RO, NF, UF, MF, forward osmosis, membrane distillation, pervaporation, electrodialysis and gas separation

  • Fouling, scaling and cleaning studies, with flux and rejection logged over time

  • Recovery, energy and pretreatment trials that produce design data for scale-up

  • Comparison of commercial membranes against a new material, on identical rigs

Characterisation and testing

Capillary flow porometry, porosity and porosimetry, air and gas permeability, BET surface area and density, contact angle, flux and rejection, molecular weight cut-off, tensile strength, filter integrity, WVTR and OTR barrier testing, burst pressure and core analysis. See contract laboratory testing and the testing services pages for each method.

Custom research rigs

When a project needs a test that no standard instrument does, we design and build the rig, run the programme on it, and can then hand the rig over to you.

How a project runs

  1. Brief and confidentiality. We sign a non-disclosure agreement and agree the question, the materials and the outcome you need.

  2. Proposal. You receive a written scope with the methods, the measurements, milestones, timing and price.

  3. Execution. The work runs in our facilities with regular progress updates. You can attend key tests.

  4. Report and data. You receive a report with methods, results and discussion, together with the raw data and, where agreed, the samples.

  5. Next step. If the result justifies it, we quote the pilot or production equipment.

Ownership of results and intellectual property is set out in the contract before work starts.

Who uses contract research

  • Industry R&D teams that need extra capacity or a method they do not run in-house

  • Start-ups that need data for investors or customers before they buy equipment

  • Universities that need a measurement, a batch of fibres or a pilot test for a grant or thesis

  • Plant operators that want to test a membrane or a process on their own water, gas or product

Start a project

Send a short description of the question, the material or feed, and the result you need to mail@techincresearch.com or call +1 (289) 622-1032. We serve clients across the world from Vaughan, Ontario, Chennai, India, Tallinn, Estonia and Al Khobar, Saudi Arabia, and reply with a proposal or with the questions we need answered first.

Scope, methods, timing and price are agreed in writing for each project. Results apply to the samples and conditions tested.

Comments


bottom of page