Liquid Flow Unit Converter: bbl/d, m³/h, US gpm, L/min, kg/h and Line Velocity

Production is reported in barrels per day, pumps are bought in m³/h, samplers are set in grabs per volume and pipes are checked in metres per second. This converter moves between them with the oil's API gravity.
How it works
1 bbl = 42 US gal = 158.987 L; 1 US gpm = 0.2271 m³/h; 1 Imperial gal = 1.20095 US gal. Density from API gravity: SG at 60 °F = 141.5 ÷ (API + 131.5). Mass flow = volume × density; velocity = flow ÷ pipe area, with a flag below 0.6 m/s (settling) and above 3 m/s (erosion).
Worked example
5,000 bbl/d of 35° API crude is 33.1 m³/h, 146 US gpm, 552 L/min, 28.1 t/h (62,000 lb/h) at 849 kg/m³, and runs at 1.9 m/s in a 3-inch schedule 40 line.
Limits
Barrels are at 60 °F; volumes at line temperature need the API MPMS Chapter 11.1 correction, up to 3 to 4% for light crude at 60 °C. Water cut changes the density of the mixture. Our in-line automatic sampling systems, fast-loop automatic sampling systems and pressurised hydrocarbon automatic sampling systems take a representative grab per set volume at exactly these flows; the chemical injection dosing calculator uses the same units. All Tech Inc. calculators and converters.
Related tools: Chemical injection dosing, Tubing pressure drop, Sample cylinder fill, Gas flow units. All 57 calculators and converters.
Write to mail@techincresearch.com or call +1 (289) 622-1032.
Disclaimer: this calculator and article give estimates from simplified, published equations and the values you enter, for general information only and without warranty. They are not engineering, design, safety or regulatory advice and are no substitute for measurement, the equipment or chemical maker's instructions, the applicable standards or the judgement of a qualified engineer. Do not rely on them for safety-critical decisions. Tech Inc. accepts no liability for loss, damage or injury arising from their use. Equipment specifications are typical and may change; results depend on the fluids and conditions, how the equipment is used and operation in line with the operation manual. See our product information disclaimer and terms of use.





Comments