Time-Lag Gas Permeation Calculator: Permeability, Diffusivity and Solubility

The time-lag method gives three transport coefficients from one experiment: permeability from the steady-state slope, diffusivity from the intercept, and solubility from their ratio.
How it works
Permeability P = (dp/dt) × Vd × l × (273.15 ÷ T) ÷ (A × 76 × p₁), in cm³(STP)·cm/(cm²·s·cmHg); 1 Barrer = 10⁻¹⁰ of that unit.
Diffusivity D = l² ÷ (6θ), where θ is the time-axis intercept of the steady-state line.
Solubility S = P ÷ D.
Worked example
A 50 µm film, θ = 120 s, 30 cm³ downstream, 0.5 mbar/min steady rise, 2 bar upstream, 12.5 cm², 25 °C: P = 6.0 Barrer, D = 3.5 × 10⁻⁸ cm²/s, S = 0.017 cm³(STP)/(cm³·cmHg).
Limits
The intercept must be read from the truly linear part of the curve; a leak or a slow pressure transducer shifts θ. Thickness enters P once and D twice, so measure it well. Our time-lag apparatus and the gas permeance converter go with this tool. All Tech Inc. calculators and converters.
Related tools: Gas permeance converter, Gas separation stage, Breakthrough capacity, Pressure units (gauge/absolute). All 57 calculators and converters.
Write to mail@techincresearch.com or call +1 (289) 622-1032.
Disclaimer: this calculator and article give estimates from simplified, published equations and the values you enter, for general information only and without warranty. They are not engineering, design, safety or regulatory advice and are no substitute for measurement, the equipment or chemical maker's instructions, the applicable standards or the judgement of a qualified engineer. Do not rely on them for safety-critical decisions. Tech Inc. accepts no liability for loss, damage or injury arising from their use. Equipment specifications are typical and may change; results depend on the membranes and conditions, how the equipment is used and operation in line with the operation manual. See our product information disclaimer and terms of use.
Sources
Imperial College London, Permeation analysis app: theoretical background (time-lag method).





Comments