top of page

Gas Separation Membrane Calculator: Selectivity, Pressure Ratio, Stage Cut and Permeate Purity

Writer: Tech Inc
Tech Inc
1 day ago
2 min read

A membrane with selectivity 25 does not give a permeate 25 times richer. Pressure ratio and stage cut both cap the enrichment, and this calculator shows how much.

How it works

Complete-mixing model for a binary feed: the permeate composition satisfies y ÷ (1 − y) = α [x_o − y/φ] ÷ [(1 − x_o) − (1 − y)/φ], and the retentate composition x_o follows from the mass balance x_f = (1 − θ)x_o + θy. The pressure-ratio limit y ≤ x_f × φ applies whatever the selectivity.

Worked example

50/50 feed, permeances 100 and 4 GPU (α = 25), 10 bar to 1 bar, stage cut 0.2: permeate 0.93, retentate 0.39, 37% recovery of the fast gas.

Limits

Complete mixing is the most pessimistic of the ideal flow models; cross-flow and counter-current modules do somewhat better. Mixed-gas permeances differ from pure-gas values. Measure them on our high-pressure CO2/CH4 skid or flue-gas CO2 membrane system, and convert units with the GPU/Barrer converter. All Tech Inc. calculators and converters.

Write to mail@techincresearch.com or call +1 (289) 622-1032.

Disclaimer: this calculator and article give estimates from simplified, published equations and the values you enter, for general information only and without warranty. They are not engineering, design, safety or regulatory advice and are no substitute for measurement, the equipment or chemical maker's instructions, the applicable standards or the judgement of a qualified engineer. Do not rely on them for safety-critical decisions. Tech Inc. accepts no liability for loss, damage or injury arising from their use. Equipment specifications are typical and may change; results depend on the membranes and conditions, how the equipment is used and operation in line with the operation manual. See our product information disclaimer and terms of use.

Sources

  • Geankoplis, Transport Processes and Separation Process Principles, 4th ed., Chapter 13 (complete-mixing model for gas permeation).

Comments


bottom of page