Flux Recovery Ratio and Fouling Resistance Calculator (Resistance-in-Series)

Every antifouling membrane paper reports the same four numbers: flux recovery ratio, total flux decline, reversible fouling and irreversible fouling. This calculator gives them, and the resistances behind them, from three flux readings.
How it works
With J₀ the pure water flux of the clean membrane, J₁ the flux at the end of the fouling run and J₂ the pure water flux after cleaning:
FRR = J₂ ÷ J₀; DRt = 1 − J₁ ÷ J₀; DRr = (J₂ − J₁) ÷ J₀; DRir = (J₀ − J₂) ÷ J₀.
Resistances from Darcy's law, R = ΔP ÷ (μJ): Rm from J₀, Rt from J₁, and Rm + Rir from J₂. Rf = Rt − Rm and Rr = Rf − Rir.
Worked example
J₀ = 120, J₁ = 70 and J₂ = 100 LMH at 1 bar and 25 °C: FRR 83%, total decline 42%, reversible 25%, irreversible 17%; Rm = 3.4 × 10¹² m⁻¹ and Rf = 2.4 × 10¹² m⁻¹.
Limits
Measure all three fluxes at the same TMP, temperature and crossflow, and use pure water for J₀ and J₂. The model lumps adsorption, pore blocking and cake into two terms. For the test rigs that hold these conditions constant, see our fouling simulator and crossflow test cells. All Tech Inc. calculators and converters.
Related tools: CIP chemical dilution, Membrane flux and permeability, Cross-flow velocity, Hagen–Poiseuille pore flux. All 57 calculators and converters.
Write to mail@techincresearch.com or call +1 (289) 622-1032.
Disclaimer: this calculator and article give estimates from simplified, published equations and the values you enter, for general information only and without warranty. They are not engineering, design, safety or regulatory advice and are no substitute for measurement, the equipment or chemical maker's instructions, the applicable standards or the judgement of a qualified engineer. Do not rely on them for safety-critical decisions. Tech Inc. accepts no liability for loss, damage or injury arising from their use. Equipment specifications are typical and may change; results depend on the membranes and conditions, how the equipment is used and operation in line with the operation manual. See our product information disclaimer and terms of use.
Sources
University of Tennessee, Membrane module theory: resistance-in-series.
Angewandte Chemie International Edition (2018), Belfort, Membrane Filtration with Liquids, via OSTI.





Comments