Gas Concentration Converter: ppm to mg/Nm³, mg/Sm³, lb/MMscf and Grains per 100 scf

Emission limits are in mg/Nm³, analysers read ppm, and gas contracts quote grains of H₂S per 100 scf. This converter does the three-way conversion with the molar volume at the reference temperature written out, so the 9% spread between 0 °C and 25 °C bases is never silent.
How it works
mg/m³ = ppmv × M ÷ V_m, with the molar volume at 1 atm: 22.414 L/mol at 0 °C, 23.645 at 15 °C, 24.055 at 20 °C, 24.465 at 25 °C. lb/MMscf = ppmv × M ÷ 379.48; grains per 100 scf = lb/MMscf × 7,000 ÷ 10,000.
Worked example
4 ppmv of H₂S (M 34.08) is 6.08 mg/Nm³ at 0 °C, 5.57 mg/m³ at 25 °C, 0.359 lb/MMscf and 0.25 grains per 100 scf, the common pipeline limit.
Limits
Emission limits also carry an oxygen and moisture reference (for example dry, 3% or 6% O₂), which this converter does not apply; correct for those separately. Mercury limits are often in µg/Nm³ and need the elemental and oxidised fractions reported. Our continuous emission monitoring systems, CEMS probe filters and spares, mercury analyser sampling systems and H₂S and moisture analyser sampling cabinets deliver the sample these numbers come from. All Tech Inc. calculators and converters.
Related tools: Dew point and moisture, Gas flow units, CO₂ capture rate, Transformer oil DGA. All 57 calculators and converters.
Write to mail@techincresearch.com or call +1 (289) 622-1032.
Disclaimer: this calculator and article give estimates from simplified, published equations and the values you enter, for general information only and without warranty. They are not engineering, design, safety or regulatory advice and are no substitute for measurement, the equipment or chemical maker's instructions, the applicable standards or the judgement of a qualified engineer. Do not rely on them for safety-critical decisions. Tech Inc. accepts no liability for loss, damage or injury arising from their use. Equipment specifications are typical and may change; results depend on the fluids and conditions, how the equipment is used and operation in line with the operation manual. See our product information disclaimer and terms of use.
Sources
US EPA, Air emissions factors and quantification: unit conversions.
Engineering ToolBox, Parts per million and mg/m³ conversion.





Comments