Pump NPSH Available Calculator: Cavitation Check from Tank Pressure, Level, Losses and Vapour Pressure

Cavitation is the most common cause of pump damage in process and utility skids, and it is predictable from four numbers. This calculator gives the net positive suction head available and compares it with what the pump needs.
How it works
NPSHa = (P_source − P_vapour) ÷ (ρ g) + z − h_f, with the source at atmospheric pressure (corrected for altitude) or at the vessel pressure, the liquid level z above or below the pump centreline, and the friction loss h_f in the suction line, strainer and fittings.
Water vapour pressure from the Buck equation and density from a standard fit at the pumping temperature; for other liquids you enter the vapour pressure and density.
The verdict compares NPSHa with NPSHr from the pump curve plus the margin you require, and for water reports the highest temperature the suction arrangement can tolerate.
Worked example
An open tank at sea level with 3 m of 60 °C water above the pump centreline and 0.8 m of suction losses: source head 10.5 m, vapour head 2.1 m, NPSHa 10.6 m. Against an NPSHr of 3.5 m plus a 1 m margin there is 6.1 m spare, and the water could reach 93 °C before the margin is lost.
Limits
NPSHr is the pump maker's test value at 3% head drop and at the actual flow; it rises steeply above the best-efficiency point. Entrained gas, vortexing at low level, hot liquids with high vapour pressure and hydrocarbon mixtures all call for more margin (the Hydraulic Institute gives guidance). Our fire water pump packages, gear pump skids, chemical injection skids, lube oil consoles and CIP and chemical cleaning skids are checked this way at design; the tank heat-up calculator and the Antoine vapour pressure calculator supply the hot-liquid inputs. All Tech Inc. calculators and converters.
Related tools: Vapour pressure (Antoine), Tank heat-up time, Liquid flow units, Tubing pressure drop. All 67 calculators and converters.
Write to mail@techincresearch.com or call +1 (289) 622-1032.
Disclaimer: this calculator and article give estimates from simplified, published equations and the values you enter, for general information only and without warranty. They are not engineering, design, safety or regulatory advice and are no substitute for measurement, the equipment or chemical maker's instructions, the applicable standards or the judgement of a qualified engineer. Do not rely on them for safety-critical decisions. Tech Inc. accepts no liability for loss, damage or injury arising from their use. Equipment specifications are typical and may change; results depend on the fluids and conditions, how the equipment is used and operation in line with the operation manual. See our product information disclaimer and terms of use.
Sources
Hydraulic Institute, ANSI/HI 9.6.1 Rotodynamic Pumps: Guideline for NPSH Margin, standards overview.
Engineering ToolBox, NPSH: net positive suction head.





Comments