NACE TM0177 and TM0284 Explained: Laboratory Tests for Sulphide Stress Cracking and Hydrogen-Induced Cracking

NACE MR0175 / ISO 15156 says which materials may be used in sour service; two test methods decide whether a given material and heat qualify. Both are published by AMPP (formerly NACE).
NACE TM0177: sulphide stress cracking and stress corrosion cracking
TM0177, Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H₂S Environments (2024 edition), describes four methods. Method A is the tensile test: a smooth specimen under constant load in the standard test solution (an acidified sodium chloride and acetic acid solution saturated with H₂S at room temperature) for 720 hours, pass or fail. Method B is the bent-beam test, Method C the C-ring test, and Method D the double-cantilever-beam fracture-mechanics test that yields a threshold stress intensity K_ISSC. Solutions A, B, C and D of different severity are defined, and the standard covers specimen preparation, solution preparation and deaeration, H₂S saturation, the test vessel and safety.
NACE TM0284: hydrogen-induced cracking
TM0284, Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking, exposes unstressed coupons to an H₂S-saturated solution for 96 hours and then sections them to measure crack length, thickness and sensitivity ratios. It is the test behind "HIC-resistant" plate and pipe.
What the tests need
Vessels and fixtures in materials that do not corrode in the test solution; continuous H₂S purge with gas-tight sealing; load frames or proof rings for Method A; temperature control; and the extraction, scrubbing and H₂S detection that make the laboratory safe. Elevated-temperature and high-pressure sour testing (for the fit-for-purpose tests in ISO 15156-3) moves the same chemistry into an autoclave.
Our equipment
Sour gas autoclaves, sour service corrosion test kits and the sour service materials testing process note cover the equipment; the NACE MR0175 / ISO 15156 guide covers where the results are applied. All our standards guides.
Send your application, materials and the standards your contract names to mail@techincresearch.com or call +1 (289) 622-1032, and we will return a configuration, datasheet and quotation.
This article is our commentary on the standard's published scope, not a substitute for the standard itself; always work to the current edition named in your contract. Equipment specifications may change; performance depends on the application, how the equipment is used and operation in line with the operation manual.
Sources
AMPP, NACE TM0177-2024 Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H₂S Environments, standard page.
Acuren, NACE TM0177 explained: Methods A, C and D, overview article.





Comments