Sour-Gas Autoclave for H2S Service

• TI-SCA – 5-litre sour-gas autoclave with H2S handling.
• Static or stirred – static exposure, or magnetically coupled stirring to reproduce flowing conditions.
• Gas handling – H2S, H2S blends, CO2 and nitrogen feeds arranged to the test method.

• Vessel volume: 5 litres
• Design pressure: up to about 200 bar (3,000 psi), or to client specification
• Design temperature: up to 350 °C, or to client specification
• Wetted materials: Alloy C-276
• H2S handling: gas panel, nitrogen purge, vent scrubbing and gas detection, to client specification
• Pressure design: designed to ASME VIII or client specification
• Controls: temperature and pressure control, with alarms, interlocks and data logging

Oil and gas operators, refiners and materials laboratories use the autoclave to check how pipe, valve and downhole materials behave in sour service before they are specified. Elastomer, seal and coating suppliers qualify their products in it, and chemical suppliers test corrosion inhibitors in sour brine. Every test follows the client's procedure or the applicable industry test method.

• Controlled H2S handling – feed, purge, vent scrubbing and detection supplied as one package.
• Corrosion-proof vessel – Alloy C-276 resists sour gas and acid brine.
• Room for specimens – the 5-litre volume takes racks of coupons and stressed specimens in one test.
• Interlocked safety – the gas supply shuts off on alarm, and the vessel carries a relief valve and rupture disc.
• Traceable results – pressure and temperature logged for every exposure.

• Established manufacturer – part of the Davey Group since 1990, exporting to more than 110 countries.
• Everything under one roof – in-house mechanical fabrication, electrical works, PLC and SCADA automation, and R&D.
• Complete scope – design, supply, installation, commissioning, factory acceptance testing (FAT) and site acceptance testing (SAT).
• Trusted by Saudi Aramco – an established supplier to Saudi Aramco.
• Certified management systems – ISO 9001, ISO 14001 and ISO 45001, with CE marking.
• Close to your project – offices in Chennai (India), Toronto (Canada), Tallinn (Estonia) and Al Khobar (Saudi Arabia).
• For this product – the sour-gas handling practice of our gas sampling panels, carried into the autoclave's feed, purge and detection systems.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation, commissioning and site acceptance testing (SAT); operator training, spares and after-sales support worldwide. Contact mail@techincresearch.com or +1 (289) 622-1032.

• Gas Sampling Panel – sour gas sampling built to the same gas-handling practice.
• Benchtop Stirred High-Pressure Reactor (Alloy C-276) – a smaller stirred vessel for method development.
• Six-Vessel Parallel Reactor Station – six vessels for screening several conditions at once.
• Gas Booster Unit – raises test gas to autoclave pressure.