NACE MR0175 / ISO 15156 Explained: Materials for Sour Service in Oil and Gas Production

Hydrogen sulphide in wet gas or oil cracks steel. NACE MR0175 / ISO 15156, Petroleum, petrochemical and natural gas industries: materials for use in H₂S-containing environments in oil and gas production, is the standard that says which materials may be used where, and it is written into every sour-service purchase order.
The three parts
Part 1 gives the general principles: the cracking mechanisms (sulphide stress cracking, stress corrosion cracking, hydrogen-induced and stress-oriented hydrogen-induced cracking), how the environment is characterised, and the responsibilities of the equipment user and the manufacturer.
Part 2 covers cracking-resistant carbon and low-alloy steels and cast irons: the H₂S partial-pressure threshold above which the environment is sour, the severity regions set by H₂S partial pressure and in-situ pH, hardness limits, and the qualification of welds.
Part 3 covers cracking-resistant corrosion-resistant alloys (martensitic, duplex, austenitic and nickel-based alloys, titanium and others), with the environmental limits of temperature, H₂S partial pressure, chloride and elemental sulphur within which each is qualified.
ISO published the 2020 editions and is finalising a further revision; NACE maintenance panel decisions are issued between editions, which is why the "current edition" matters.
What it means for equipment
Materials selected by the environment, not by habit: 316L is qualified only within chloride, temperature and H₂S limits; duplex and super duplex have their own; Alloy 625 and 825 cover most severe cases. Hardness limits on carbon steel welds, documented heat treatment, and material certificates that state compliance. For small-bore sampling and injection equipment, every wetted component, down to the tubing, fittings, springs and valve trim, has to be checked.
Our equipment
Sour gas autoclaves, gas sampling panels for sour gas, H₂S and moisture analyser sampling cabinets and sour-service chemical injection skids are specified wetted-part by wetted-part to the standard; the NACE TM0177 and TM0284 guide covers the tests that qualify a material, and the sour service materials testing process note shows the autoclave programme. All our standards guides.
Send your application, materials and the standards your contract names to mail@techincresearch.com or call +1 (289) 622-1032, and we will return a configuration, datasheet and quotation.
This article is our commentary on the standard's published scope, not a substitute for the standard itself; always work to the current edition named in your contract. Equipment specifications may change; performance depends on the application, how the equipment is used and operation in line with the operation manual.
Sources
ISO, ISO 15156-1:2020 Petroleum, petrochemical and natural gas industries: materials for use in H₂S-containing environments in oil and gas production, Part 1, standard summary page.
AMPP, NACE MR0175 / ISO 15156, standards overview.





Comments