ISO 21457 Explained: Materials Selection and Corrosion Control for Oil and Gas Production Systems

Materials selection in an oil and gas project is a process, not a table lookup. ISO 21457:2010, Petroleum, petrochemical and natural gas industries: materials selection and corrosion control for oil and gas production systems, describes that process and the corrosion mechanisms it has to address.
What it covers
ISO's summary describes the standard as giving the principles and requirements for materials selection and corrosion control for production systems: wells, flowlines, processing, utilities, injection, export and storage. It covers the information needed (fluid composition, CO₂ and H₂S partial pressures, water chemistry, temperature, flow, oxygen, solids, operating life), the corrosion mechanisms (CO₂ corrosion, H₂S cracking per ISO 15156, chloride pitting and crevice corrosion, stress corrosion cracking, oxygen corrosion, microbiologically influenced corrosion, erosion and erosion-corrosion, galvanic effects), and the selection options: carbon steel with a corrosion allowance and chemical inhibition, carbon steel with cladding or lining, corrosion-resistant alloys (martensitic and duplex stainless steels, austenitic alloys, nickel alloys, titanium), and non-metallic materials. It also addresses corrosion monitoring and the documentation of the selection in a materials selection report.
The decision it frames
The central economic question is carbon steel plus inhibitor plus allowance against a corrosion-resistant alloy. The standard requires that the CO₂ corrosion rate be predicted (by a recognised model), that inhibitor availability be assumed realistically, that the sour-service limits of ISO 15156 be respected, and that the whole-life cost and the consequences of failure be weighed. Test equipment enters here: autoclave corrosion tests, inhibitor evaluation and sour-service qualification produce the data the selection relies on.
Our equipment
Sour gas autoclaves, sour service corrosion test kits, chemical injection skids for inhibitor delivery and sampling systems for the water chemistry the selection depends on are specified from this process; the NACE MR0175 / ISO 15156 guide and the NACE TM0177 and TM0284 guide cover the sour-service limits and tests. All our standards guides.
Send your application, materials and the standards your contract names to mail@techincresearch.com or call +1 (289) 622-1032, and we will return a configuration, datasheet and quotation.
This article is our commentary on the standard's published scope, not a substitute for the standard itself; always work to the current edition named in your contract. Equipment specifications may change; performance depends on the application, how the equipment is used and operation in line with the operation manual.





Comments