top of page

ASME B16.5 Explained: Pipe Flanges, Pressure Classes and Pressure–Temperature Ratings

Writer: Tech Inc
Tech Inc
1 hour ago
2 min read

ASME B16.5, Pipe Flanges and Flanged Fittings, NPS 1/2 through NPS 24 (2020 edition) is the standard behind every flanged joint on a skid, a reactor nozzle or a sampling probe connection in the inch-size world. Larger flanges are in B16.47; metric-system equivalents are in EN 1092.

What it covers

ASME's summary describes pressure–temperature ratings, materials, dimensions, tolerances, marking, testing and methods of designating openings for flanges and flanged fittings in seven pressure classes: 150, 300, 400, 600, 900, 1500 and 2500. The flange types are weld neck, slip-on, socket weld, threaded, lap joint and blind; facings are raised face, ring-type joint and flat face, with the small and large tongue-and-groove and male-and-female facings also defined.

The point most often misread

The class is a label, not a pressure. The allowable working pressure of a Class 300 flange depends on the material group and the temperature: a carbon steel A105 Class 300 flange is rated around 51 bar at 38 °C but far less at 400 °C, and a stainless 316 flange of the same class carries a lower rating at ambient and a different curve with temperature. The standard's tables give the rating for each material group at each temperature step; the designer picks the class from the table, not from the design pressure alone. Hydrostatic test pressure is 1.5 times the 38 °C rating.

Gaskets and bolting

Gasket dimensions are in ASME B16.20 (spiral-wound, ring-joint and jacketed metal gaskets) and B16.21 (non-metallic flat gaskets); bolting is specified by the flange standard, with the bolt material matched to the flange and the service temperature. Ring-type joints (RTJ) are the norm at API 6A wellheads and in high-pressure gas; raised-face spiral-wound joints in most process piping.

Our equipment

Nozzles and connections on our fuel gas conditioning skids, pressure reducing and metering stations, standard high-pressure reactors and sample conditioning systems are specified by class, facing and material group with the rating checked at design temperature; the pressure unit converter and ASME B31.3 guide are the companions. All our standards guides.

Send your application, materials and the standards your contract names to mail@techincresearch.com or call +1 (289) 622-1032, and we will return a configuration, datasheet and quotation.

This article is our commentary on the standard's published scope, not a substitute for the standard itself; always work to the current edition named in your contract. Equipment specifications may change; performance depends on the application, how the equipment is used and operation in line with the operation manual.

Sources

Comments


bottom of page