top of page

ISO 13443 and ISO 6976 Explained: Standard Reference Conditions and Calorific Value of Natural Gas

Writer: Tech Inc
Tech Inc
1 day ago
2 min read

A gas volume means nothing without its reference conditions, and a calorific value means nothing without the method that calculated it. Two ISO standards fix both.

ISO 13443: standard reference conditions

ISO 13443:1996 (confirmed) specifies the standard reference conditions for natural gas and similar fluids, for measurement and calculation: a temperature of 15 °C and an absolute pressure of 101.325 kPa, with the gas dry. The standard exists because industry has used several references, 0 °C (normal conditions), 15 °C, 20 °C and 60 °F (15.56 °C), and the volume, density and calorific value per cubic metre differ by up to 7% between them. The standard also notes that where contracts or regulations fix other conditions, those apply, which is why every datasheet and contract must state its reference.

ISO 6976: calorific value, density and Wobbe index

ISO 6976:2016 specifies methods for calculating, from the molar composition of a natural gas, its superior and inferior calorific value, density, relative density and Wobbe index, at the specified reference conditions for combustion and for metering. It tabulates the pure-component properties used in the calculation and gives the compression-factor method for converting between ideal and real gas. Custody-transfer gas chromatographs implement this standard in their firmware; a mismatch of reference conditions between the GC, the flow computer and the contract is a classic source of billing disputes.

Practical consequences

State the reference (15 °C/101.325 kPa, 0 °C, 20 °C or 60 °F) on every flow, density and calorific value; make the flow computer, the chromatograph and the contract agree; convert explicitly when a supplier quotes Nm³/h and the contract is in Sm³/h.

Our equipment

Gas metering skids, pressure reducing and metering stations and GC sampling cabinets are specified with the reference conditions written on the datasheet; the gas flow unit converter moves between the four references explicitly. All our standards guides.

Send your application, materials and the standards your contract names to mail@techincresearch.com or call +1 (289) 622-1032, and we will return a configuration, datasheet and quotation.

This article is our commentary on the standard's published scope, not a substitute for the standard itself; always work to the current edition named in your contract. Equipment specifications may change; performance depends on the application, how the equipment is used and operation in line with the operation manual.

Sources

Comments


bottom of page