GPA 2166 and GPA 2174 Explained: Spot Sampling Methods for Natural Gas and NGL

Where ISO 10715 is the international guideline, the standards most North American gas contracts actually name are GPA 2166 for natural gas and GPA 2174 for liquid hydrocarbons (NGL, condensate, LPG). Both are published by GPA Midstream and adopted as ANSI standards; GPA 2166 is also incorporated by reference in US federal measurement rules.
GPA 2166: spot sampling of natural gas
The standard describes how to obtain a spot sample of natural gas for analysis by gas chromatography. It sets out several fill methods for sample cylinders (fill-and-empty, controlled-rate, evacuated-cylinder, helium pop, floating-piston and others), the conditions under which each is valid, the need to keep the sample above its hydrocarbon dew point, cylinder preparation and purging, and the information recorded with the sample. The choice of method depends on the gas, the pressure and the temperature at the sample point relative to the dew point.
GPA 2174: liquid hydrocarbons
GPA 2174 covers sampling of liquid hydrocarbons (NGL mix, raw make, natural gasoline and similar) into floating-piston (constant-pressure) cylinders, so that the liquid stays single-phase from the pipeline to the laboratory and the light ends are not lost. It specifies the cylinder, the pre-charge gas pressure, the fill procedure and the outage that gives room for thermal expansion.
Equipment consequences
A sampling panel that supports GPA 2166 needs purge routing, a heated regulator or heat tracing where the sample is near its dew point, and the valving to run the fill-and-empty or controlled-rate methods repeatably; GPA 2174 needs piston cylinders with a pre-charge connection and a relief. Our gas sampling panels, constant-pressure sample cylinders, sample cylinder assemblies and the sample cylinder cleaning station cover the cycle; the sample cylinder fill calculator does the outage arithmetic. All our standards guides.
Send your application, materials and the standards your contract names to mail@techincresearch.com or call +1 (289) 622-1032, and we will return a configuration, datasheet and quotation.
This article is our commentary on the standard's published scope, not a substitute for the standard itself; always work to the current edition named in your contract. Equipment specifications may change; performance depends on the application, how the equipment is used and operation in line with the operation manual.
Sources
GPA Midstream, Technical standards (GPA 2166 and GPA 2174).
US Government Publishing Office, GPA 2166-2017 as incorporated by reference in 43 CFR 3175 (public copy via law.resource.org).





Comments