top of page

API 675 and API 674 Explained: Controlled-Volume and Reciprocating Pumps for Chemical Injection

Writer: Tech Inc
Tech Inc
1 day ago
2 min read

A chemical injection skid lives or dies on its pump, and the pump is specified to one of two API standards: API 675 for controlled-volume (metering) pumps, and API 674 for larger reciprocating positive-displacement pumps.

API 675: controlled-volume pumps

API Standard 675, Positive Displacement Pumps, Controlled Volume for Petroleum, Chemical, and Gas Industry Services (third edition 2012, reaffirmed), covers plunger and diaphragm metering pumps whose flow is set by stroke length or speed. It specifies steady-state accuracy (typically ±1% of rated capacity over the turndown range), linearity and repeatability, a 10:1 turndown, design pressure and relief, materials, the drive and stroke-adjustment mechanism, and for diaphragm pumps the hydraulic actuation, diaphragm rupture detection and refill valves. It also covers testing: a performance test at the specified conditions and, where asked, a net positive suction pressure test.

API 674: reciprocating pumps

API Standard 674, Positive Displacement Pumps, Reciprocating, covers larger plunger and piston pumps for process and pipeline duties where flow is set by speed: pulsation control, pressure limitations, bearings and lubrication, drive trains and the pulsation-study requirements that keep piping from vibrating.

What a skid specification should ask for

Rated capacity at the maximum discharge pressure with the stated accuracy; turndown; suction conditions and NPIP; diaphragm material and rupture detection; relief valve setting; calibration column and pulsation dampener; and the API datasheet filled in. Dose is set in ppm but bought in L/h, so the pump is selected around the duty point with margin on both sides.

Our equipment

Send your application, materials and the standards your contract names to mail@techincresearch.com or call +1 (289) 622-1032, and we will return a configuration, datasheet and quotation.

This article is our commentary on the standard's published scope, not a substitute for the standard itself; always work to the current edition named in your contract. Equipment specifications may change; performance depends on the application, how the equipment is used and operation in line with the operation manual.

Sources

Comments


bottom of page