API 614 Explained: Lubrication, Shaft-Sealing and Oil-Control Systems for Turbomachinery

Compressors, turbines, gearboxes and large pumps in refineries and gas plants run on oil systems built to API Standard 614, Lubrication, Shaft-Sealing and Oil-Control Systems and Auxiliaries. The sixth edition (2022) is current; it is also published as ISO 10438 in an earlier form.
How the standard is organised
API 614 has several chapters: general requirements that apply to all systems; special-purpose oil systems (for critical, unspared machinery, with the highest redundancy and instrumentation); general-purpose oil systems (for spared or non-critical equipment); dry gas seal and self-acting gas seal support systems; and a chapter on oil-control systems for turbomachinery. Datasheets in the standard let the purchaser specify the system component by component.
What it asks for
Reservoir: retention time, sloped bottom, rundown capacity, heaters, breathers and instrumentation defined by the standard.
Pumps: a main and a standby (often one shaft-driven and one motor-driven, or two motor-driven with different power sources), with auto-start on low pressure; rundown tanks or accumulators where the machine must coast down safely.
Coolers and filters: twin (duplex) units with continuous-flow transfer valves so a cooler or filter can be changed with the machine running; filtration ratings and differential-pressure instrumentation specified.
Control: pressure, temperature and level instrumentation with alarms and trips laid out in the standard's tables; a temperature control valve on the cooler.
Materials and construction: stainless steel for piping downstream of the filters on special-purpose systems; cleanliness and flushing requirements before commissioning.
Our equipment
Lube oil consoles, heated lube oil flushing skids, lube oil filter test benches and the lubrication stations range are built to the general-purpose and special-purpose chapters; the lube oil viscosity calculator and ISO 4406 calculator cover the oil-side numbers the standard references. All our standards guides.
Send your application, materials and the standards your contract names to mail@techincresearch.com or call +1 (289) 622-1032, and we will return a configuration, datasheet and quotation.
This article is our commentary on the standard's published scope, not a substitute for the standard itself; always work to the current edition named in your contract. Equipment specifications may change; performance depends on the application, how the equipment is used and operation in line with the operation manual.
Sources
API, API Standard 614 Lubrication, Shaft-Sealing and Oil-Control Systems and Auxiliaries, 6th edition 2022, summary listing.
BSI Knowledge, API 614 Lubrication, shaft-sealing and oil-control systems and auxiliaries, summary page.





Comments