top of page

VIT Casts Supercapacitor Films from Graphene Ink on a Tech Inc. Casting Machine

Writer: Tech Inc
Tech Inc
14 hours ago
2 min read

At a glance. A membrane casting machine is, at heart, a precision film applicator. Researchers at Vellore Institute of Technology used a Tech Inc. flat sheet casting machine as a doctor blade to draw electrode films from a water-based graphene ink, and reached an areal capacitance of 98.61 mF/cm² without any binder or surfactant.

Why this matters

Printed supercapacitors could power flexible electronics, sensors and wearables, but the inks usually need toxic solvents, binders or surfactants to keep graphene from clumping. Each additive costs conductivity. A water-based ink that stays dispersed on its own would make printed energy storage cleaner and simpler to manufacture.

What the team did

Kiran Nargatti and Sandeep Ahankari of VIT, with John Ryan Dizon of Bataan Peninsula State University and colleagues at the University of Malaya, mixed reduced graphene oxide (rGO) with cellulose nanofibre (CNF) in water. The nanofibres act as spacers between the graphene flakes and stop them restacking. They varied the CNF content, cast films from each ink and measured wettability, conductivity and electrochemical performance.

Where Tech Inc. came in

Capacitance per unit area depends on how much material sits on each square centimetre, so film thickness has to be uniform and repeatable. The team drew its films on a Tech Inc. flat sheet casting machine used as a doctor-blade applicator, with a set gap and a steady blade speed. The same machine that casts membranes cast these electrodes. Our film applicator and membrane coater is built for exactly this kind of coating work.

Results that stand out

  • The rGO/CNF-15 film reached a maximum areal capacitance of 98.61 mF/cm² at 1 mA/cm², close to a pure rGO film.

  • CNF made the films markedly more hydrophilic while they kept good electrical conductivity.

  • The ink needs no binder and no surfactant, and uses water as the only solvent.

  • The authors see it as a candidate for printing supercapacitor electrodes.

What it means for your lab

If your group makes electrodes, coatings or functional films as well as membranes, one film applicator or lab casting machine covers both. The same Professor Ahankari's group also used Tech Inc. hollow fibres for biogas upgrading; see the biogas study.

The paper

Nargatti, K. I., Ahankari, S. S., Dizon, J. R. C. and Subramaniam, R. (2024). Environmentally friendly water-based reduced graphene oxide/cellulose nanofiber ink for supercapacitor electrode applications. ACS Omega 9, 11730. doi:10.1021/acsomega.3c09139

Read the full paper at the publisher for methods, data and figures.

Part of the Research with Tech Inc. series

This post is one of a series on published research made with Tech Inc. equipment and materials. See the full list on Research using Tech Inc. equipment. Next in the series: UTS and IIT Guwahati Push Membrane Distillation to 90% Recovery, Tracked on the AL-500.

Published with our equipment? Send the reference to mail@techincresearch.com and we will feature your work. To discuss equipment for a similar study, call +1 (289) 622-1032 or write to mail@techincresearch.com.

Comments


bottom of page