top of page

ISO 9277 and ISO 15901 Explained: BET Surface Area and Pore Size by Gas Adsorption and Mercury Porosimetry

Writer: Tech Inc
Tech Inc
1 day ago
2 min read

A catalyst datasheet gives a BET surface area in m²/g and a pore volume in cm³/g. The methods behind those numbers are international standards, and the standards say more about validity than most datasheets admit.

ISO 9277: BET specific surface area

ISO 9277:2022 (replacing the 2010 edition) specifies the determination of the specific surface area of disperse or porous solids by physisorption of a gas (nitrogen at 77 K is the usual adsorptive; argon and krypton are covered) and evaluation by the BET method. It covers sample preparation and outgassing, volumetric and gravimetric measurement, the multipoint evaluation in the appropriate relative-pressure range, the single-point approximation and its limits, and the consistency criteria that decide whether a BET value is meaningful for microporous materials. It also states what the method does not do: BET does not give a true geometric area for microporous solids, only a comparative value.

ISO 15901: pore size distribution and porosity

The ISO 15901 series covers pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption. Part 1 (ISO 15901-1:2016) is mercury porosimetry for macropores and mesopores down to a few nanometres, based on the Washburn relation between intrusion pressure and pore diameter; Part 2 covers gas adsorption for mesopores and macropores; Part 3 covers micropores by gas adsorption. The parts set out sample preparation, the measurement, the evaluation models and the information to report with a result, including the contact angle and surface tension assumed for mercury.

What to ask for on a datasheet

The adsorptive and temperature, the outgassing conditions, the relative-pressure range used for BET and the C constant, the model used for pore size, and whether the result is from a multipoint or single-point measurement. Without these, two laboratories' numbers cannot be compared.

Our equipment

BET surface area analysers, gas pycnometers, chemisorption analysers and the porosimeters range are built for these methods; the BET surface area calculator performs the multipoint evaluation and consistency checks the standard asks for. All our standards guides.

Send your application, materials and the standards your contract names to mail@techincresearch.com or call +1 (289) 622-1032, and we will return a configuration, datasheet and quotation.

This article is our commentary on the standard's published scope, not a substitute for the standard itself; always work to the current edition named in your contract. Equipment specifications may change; performance depends on the application, how the equipment is used and operation in line with the operation manual.

Sources

Comments


bottom of page