IEC 60079, ATEX and IECEx Explained: Explosion Protection for Analyser Houses, Skids and Instruments

Any equipment installed where flammable gas or vapour can be present has to be explosion-protected, and the paperwork comes in three forms that are often confused.
IEC 60079: the standards
The IEC 60079 series, Explosive atmospheres, is the technical basis worldwide. Part 0 gives the general requirements for equipment; Part 10-1 the classification of areas into Zones 0, 1 and 2 (gas) and the equivalent dust zones; and the protection-concept parts define how equipment is made safe: flameproof enclosures (Ex d, Part 1), increased safety (Ex e, Part 7), intrinsic safety (Ex i, Part 11), pressurised enclosures (Ex p, Part 2) for analyser houses and large cabinets, and others. Equipment is marked with its protection concept, gas group (IIA, IIB, IIC by ignition energy), temperature class (T1 to T6 by maximum surface temperature) and equipment protection level (Ga, Gb, Gc matching the zone).
ATEX: the EU directives
ATEX is two European directives: 2014/34/EU for equipment placed on the market (manufacturer's obligations, conformity assessment, CE and Ex marking, and for Category 1 and 2 equipment a notified-body certificate) and 1999/92/EC for workplaces (zone classification, explosion protection document). ATEX uses the IEC 60079 standards, harmonised as EN IEC 60079, as the presumption of conformity.
IECEx: the international scheme
IECEx is the IEC's conformity assessment system: a certificate of conformity to IEC 60079 issued by an accredited certification body, accepted in many countries outside the EU and used by operators who want one certificate for a global fleet. Many products carry both ATEX and IECEx certificates from the same test report.
What it means for an analyser house or skid
Zone and gas group from the plant's area classification; an Ex p pressurised house with purge control and gas detection, or Ex d/Ex e components in an open skid; Ex i instrument loops with barriers; certified cable glands and entries; a temperature class that suits the gases present; and the certificates in the data book. Our analyser shelters, analyser shelters and sample conditioning systems, wellhead control panels and hazardous-area skids are specified this way; the IEC 60529 IP rating guide covers the ingress side of the same enclosures. All our standards guides.
Send your application, materials and the standards your contract names to mail@techincresearch.com or call +1 (289) 622-1032, and we will return a configuration, datasheet and quotation.
This article is our commentary on the standard's published scope, not a substitute for the standard itself; always work to the current edition named in your contract. Equipment specifications may change; performance depends on the application, how the equipment is used and operation in line with the operation manual.
Sources
IEC, IEC 60079 series: explosive atmospheres, ANSI Webstore series overview.
European Commission, ATEX directive 2014/34/EU, official summary.
IECEx, IECEx System, official site.





Comments