Analyser Shelter

• Walk-in shelter – steel or GRP sandwich construction for several analysers and their sample systems.
• Three-sided lean-to – open-front shelter that protects analysers from sun and rain where full enclosure is not needed.
• Analyser cabinet – compact enclosure for a single analyser or a small group close to the sample point.
• Containerised shelter – built in a container frame for easy transport, lifting and placement on site.
• Pressurised (purged) shelter – kept at positive pressure for installation in hazardous areas.
• TI-AS-3 – analyser shelter built and fitted out ready to receive analysers supplied by others.

• Hazardous-area classification: to site requirement, Zone 1 or Zone 2, or to client specification
• Size: typical 2.5 × 2.5 m to 12 × 3 m, or to client specification
• Ambient design temperature: up to +55 °C for Gulf sites, or to client specification
• Construction: steel or GRP sandwich panels, or to client specification
• Gas detection: flammable gas, H2S and O2 depletion, or to client specification
• HVAC and power: sized to the internal heat load, the site ambient and the analyser power demand, with UPS, or to client specification

Analyser shelters serve refinery and gas-plant analyser houses, pipeline metering stations and offshore platforms, as well as LNG and petrochemical plants. Typical duties include housing process gas chromatographs, moisture and H2S analysers, and emissions monitoring analysers with their calibration gases, close to the sample points they serve.

• Fully integrated – shelter, analysers, sample systems and utilities assembled and FAT-tested before shipment.
• One point of responsibility – one supplier for the shelter, the analysers and the sample systems.
• Reduced site installation time – the shelter arrives ready to connect to power, signals and sample lines.
• Safe working environment – gas detection, HVAC and lighting for operators and maintenance staff.
• Built for hot climates – ambient design up to +55 °C for Gulf sites.

• Established manufacturer – part of the Davey Group since 1990, exporting to more than 110 countries.
• Everything under one roof – in-house mechanical fabrication, electrical works, PLC and SCADA automation, and R&D.
• Complete scope – design, supply, installation, commissioning, factory acceptance testing (FAT) and site acceptance testing (SAT).
• Trusted by Saudi Aramco – an established supplier to Saudi Aramco.
• Certified management systems – ISO 9001, ISO 14001 and ISO 45001, with CE marking.
• Close to your project – offices in Chennai (India), Toronto (Canada), Tallinn (Estonia) and Al Khobar (Saudi Arabia).
• For this product: shelter, HVAC, gas detection and sample conditioning panels engineered and FAT-tested as one unit before shipment.

Engineering to your P&ID, data sheets and company standards; drawings submitted for approval before manufacture; factory acceptance testing (FAT) with client or third-party inspection; export packing and full documentation dossier; installation, commissioning and site acceptance testing (SAT); operator training, spares and after-sales support worldwide. Contact mail@techincresearch.com or +1 (289) 622-1032.

• Sample Conditioning System – the panels that prepare the sample for each analyser in the shelter.
• Gas Panels and Stream-Switching Systems – calibration gas manifolds and stream switching mounted in or beside the shelter.
• Continuous Emission Monitoring System (CEMS) – stack emissions analysers housed in a cabinet or shelter.
• Gas Metering Skid – pipeline metering stations that use a shelter for gas quality analysers.