top of page

Application Note: Filtering Gelatin and Collagen Liquors

Writer: Tech Inc
Tech Inc
5 days ago
2 min read

At a glance. Gelatin is extracted from bone, hide or fish skin with hot water, then clarified, deionised, concentrated, sterilised and dried. Clarity, colour and ash in the final gelatin depend largely on how well the liquor is filtered.

The process in brief

  1. Raw material preparation. Bone is demineralised with dilute hydrochloric acid to give ossein; hides and skins are conditioned with lime or acid.

  2. Extraction. The prepared material is extracted with hot water in several stages at rising temperatures. Early extracts give the strongest, lightest gelatin.

  3. Clarification. The thin liquor carries fat, fibres and fine particles. It is filtered, usually with filter aid in pressure leaf or plate filters.

  4. Ion exchange. Cation and anion exchange remove salts and lower the ash.

  5. Concentration and sterilisation. The liquor is evaporated, sterilised at high temperature for a short time, cooled to a gel, dried and milled.

Collagen peptides follow the same path to the extraction stage, then add enzymatic hydrolysis and often membrane steps before drying.

Filtration points

  • Temperature. The liquor is filtered hot to keep the viscosity down and prevent gelling in the filter.

  • Filter aid. Diatomaceous earth or cellulose precoat and body-feed give clear liquor without blinding the leaves.

  • Closed and hygienic. Stainless leaves and vessel, clean-in-place connections and no open cake handling.

  • Polishing. A final cartridge or depth filter before ion exchange protects the resin.

Where Tech Inc. equipment fits

Tech Inc. builds the pressure leaf filter skid for liquor clarification and supplies food-grade filter cartridges and sheets and the beverage polishing filter skid for final polishing duties.

Related reading

Sources

This note is general information. Each filter is sized from tests on the plant's own liquor.

Comments


bottom of page