top of page

Food-Grade Filter Cartridges and Depth Sheets: Better Filtration for Beverage and Food Plants

Writer: Tech Inc
Tech Inc
Nov 11
2 min read

At a glance. Breweries, whisky and IMFL bottlers, soft-drink plants, edible-oil refiners, coffee-extract plants and perfume houses all replace filter parts on a fixed schedule. The Tech Inc. food-grade filter range gives them cartridges, depth sheets, bags and CO2 polishers made in food-grade materials, fitted to the housings and presses already installed. For a plant that wants filtration it can rely on, it is one of the best changes it can make.

The range

Part

What it is

TI-FG30

30-inch pleated polypropylene cartridge in food-grade materials

TI-DS40

40 x 40 cm depth filter sheet for plate-and-frame filters

Filter bags

Coarse and pre-filtration

TI-CO2P

Yearly CO2 polishing cartridge set

Housings

Stainless steel single and multi-round housings

Why the details matter

A filter in a beverage line touches the product directly. It has to be made from materials chosen for food contact, fit the housing without bypass, last as long as the part it replaces and arrive when the schedule says. Tech Inc. makes or finishes its cartridges, sheets and housings in Chennai, close to Indian and Gulf plants, and supplies food-contact test documentation to the buyer's requirement.

Why it is one of the best things to happen to beverage and food filtration

  • Food-grade materials chosen for food and beverage service.

  • Drop-in fit to the housings and presses already installed.

  • Local supply with short lead times in India and the Gulf.

  • Trial first. Plant trials against the existing parts before any switch.

  • One supplier for cartridges, sheets, bags, CO2 polishers and housings.

Where they are used

Beer and whisky polishing, IMFL bottling, soft-drink syrup and water, edible-oil polishing, coffee and tea extract, perfume and fragrance filtration and beverage CO2 polishing. The same sheets and cartridges run in the Tech Inc. Beverage Polishing Filter Skid and Fragrance Chill-Filtration Skid.

Frequently asked questions

Will the cartridges fit my existing housings?

End fittings and seals are matched to the housings already in use. Send the existing part number or a sample.

What documentation comes with the parts?

Food-contact test documentation to the buyer's requirement, such as FDA, EU or IS 9845.

Can I trial them first?

Yes. Tech Inc. runs plant trials against the incumbent parts before supply begins.

Send your existing part numbers, flow rates and change schedule to mail@techincresearch.com or call +1 (289) 622-1032 for a selection and quotation.

Comments


bottom of page