top of page

API 6D Explained: Pipeline and Piping Valves, Design, Testing and Documentation

Writer: Tech Inc
Tech Inc
12 minutes ago
2 min read

API Specification 6D, Specification for Valves (25th edition, 2021, formerly titled Pipeline and Piping Valves) covers the gate, plug, ball and check valves used in pipeline systems and process piping; it is also published as ISO 14313. Most procurement of isolation valves for skids, manifolds and metering stations cites it.

What it covers

API's scope describes design, manufacturing, assembly, testing and documentation of the valve types above for pressure classes from ASME Class 150 to 2500 (and API 6A-style pressure ratings for some), in sizes from DN 15 to DN 1500 and beyond. Design requirements cover pressure-containing parts, stem retention (anti-blow-out stems), bore (full or reduced), drain and vent connections, double-block-and-bleed and double-isolation-and-bleed configurations, cavity relief for trunnion ball valves, fire-tested designs by reference to API 607 or API 6FA, and operators and actuators. Material requirements reference ASME and ASTM materials with sour-service compliance to NACE MR0175 / ISO 15156 when specified.

Testing

Every valve is pressure tested: a hydrostatic shell test at 1.5 times the pressure rating, a seat test at 1.1 times the rating (hydrostatic, with an optional low-pressure gas seat test), with the duration set by size, and acceptance criteria that depend on the seat type (zero visible leakage for soft seats, defined allowances for metal seats per ISO 5208 rates). Supplementary tests (gas shell test, fugitive emission, cryogenic, fire test, cycle test) are by agreement.

Documentation

A 6D valve comes with a certificate of compliance, material certificates for pressure-containing parts (EN 10204 3.1), pressure test reports and, for quality specification level requirements (QSL 1 to 4, introduced in the recent editions), the additional NDE and traceability records.

Our equipment

Isolation and check valves on our pressure reducing and metering stations, gas metering skids, chemical injection skids and surge relief skids are specified to 6D, and our high-pressure hydrostatic test units perform the shell and seat tests; the ISO 5208 and API 598 guide covers the test standards in detail. All our standards guides.

Send your application, materials and the standards your contract names to mail@techincresearch.com or call +1 (289) 622-1032, and we will return a configuration, datasheet and quotation.

This article is our commentary on the standard's published scope, not a substitute for the standard itself; always work to the current edition named in your contract. Equipment specifications may change; performance depends on the application, how the equipment is used and operation in line with the operation manual.

Sources

Comments


bottom of page