top of page

API 682 Explained: Pump Shaft Sealing Systems, Seal Categories and Piping Plans

Writer: Tech Inc
Tech Inc
24 minutes ago
2 min read

A mechanical seal keeps a pumped fluid in the pump; the seal support system keeps the seal alive. API Standard 682, Pumps: Shaft Sealing Systems for Centrifugal and Rotary Pumps (fourth edition, 2014) defines both, and its piping plan numbers are a language the whole industry uses.

Categories, types and arrangements

API 682 classifies seals by Category (1 for mild services, 2 and 3 for API 610 pumps with more severe duties and more qualification testing), Type (A pusher, B non-pusher bellows, C high-temperature metal bellows) and Arrangement (1 single seal, 2 dual unpressurised with a buffer fluid, 3 dual pressurised with a barrier fluid). The standard sets design requirements, materials, qualification testing of seal designs, and the datasheets.

The piping plans

The plans define how the seal chamber is flushed, cooled and supported: Plan 11 (discharge recirculation through an orifice), Plan 13 (seal chamber to suction), Plan 21 and 23 (cooled recirculation; 23 with a pumping ring and cooler), Plan 32 (external clean flush), Plan 52 (dual unpressurised with a reservoir), Plan 53A/B/C (dual pressurised barrier fluid with a reservoir, bladder accumulator or piston accumulator), Plan 54 (external pressurised barrier system), Plan 62 (external quench), and the gas plans 72, 74, 75 and 76 for dual gas-lubricated seals with buffer or barrier gas panels and condensate collection. Each plan has a defined set of instruments, reservoir sizing and alarm points.

What it means for the support equipment

Plan 53 reservoirs with level, pressure and cooling; Plan 54 barrier fluid circulation skids with pumps, coolers, filters and instrumentation; Plan 72/74 gas panels with filters, regulators, flow and pressure indication and low-pressure alarms. These are small skids built to the same standards as lube systems (API 614 for larger circulating systems) with the API 682 datasheet defining the duty.

Our equipment

Seal support reservoirs and barrier fluid skids are built on the same engineering as our lube oil consoles and lubrication stations; buffer and barrier gas panels on the gas distribution systems. See the API 614 guide for the lubrication side. All our standards guides.

Send your application, materials and the standards your contract names to mail@techincresearch.com or call +1 (289) 622-1032, and we will return a configuration, datasheet and quotation.

This article is our commentary on the standard's published scope, not a substitute for the standard itself; always work to the current edition named in your contract. Equipment specifications may change; performance depends on the application, how the equipment is used and operation in line with the operation manual.

Sources

Comments


bottom of page