top of page

3,500 Hours of Membrane Distillation on Tech Inc. Capillary PTFE Membranes at ZUT Szczecin

Writer: Tech Inc
Tech Inc
14 hours ago
2 min read

At a glance. Short tests flatter membranes. Piotr Woźniak and Marek Gryta of the West Pomeranian University of Technology in Szczecin ran capillary PTFE membranes, supplied by Tech Inc. in bundles of 50, through more than 3,500 hours of membrane distillation on brines up to 300 g/L and on oil-contaminated feeds. The membranes kept 100 per cent salt rejection for 2,000 hours.

Why this matters

Membrane distillation is one of the few processes that can concentrate brines close to saturation, which makes it a candidate for zero liquid discharge. Its weak point is wetting: once liquid enters the pores, salt passes through. The only way to know how a membrane copes is to run it for months on realistic feeds.

What the team did

The team built modules from commercial PTFE capillary membranes and ran them on sodium chloride solutions from 35 to 300 g/L, and on brines contaminated with 70 to 120 mg/L of oil, for more than 3,500 hours in total. They tracked flux, distillate conductivity and wetting, described how oil droplets wet the pores, and tested a solvent cleaning method.

Where Tech Inc. came in

Tech Inc. supplied the capillary PTFE membranes for the study, in bundles of 50 for module building. PTFE capillaries combine high hydrophobicity with chemical resistance, which is why they suit long distillation runs on aggressive feeds. Our hollow fibre and capillary membranes are available for module building in research quantities.

Results that stand out

  • Raising salt concentration from 35 to 300 g/L halved the permeate flux.

  • The membranes retained 100% salt rejection after 2,000 hours of module operation.

  • Oil at 120 mg/L wetted some pores, and distillate conductivity rose to 450 µS/cm after 700 hours.

  • A solvent cleaning step restored the module's original performance.

  • After cleaning, flux and distillate conductivity stayed stable for a further 280 hours at 35 g/L NaCl.

What it means for your lab

Long-duration distillation tests need membranes, modules and a rig that run unattended for weeks. We supply capillary and hollow fibre membranes, flat sheet MD membranes, MD test cells and complete membrane distillation test systems with data logging.

The paper

Woźniak, P. and Gryta, M. (2023). Wettability studies of capillary PTFE membranes applied for membrane distillation. Membranes 13(1), 80. doi:10.3390/membranes13010080

Read the full paper at the publisher for methods, data and figures.

Part of the Research with Tech Inc. series

This post is one of a series on published research made with Tech Inc. equipment and materials. See the full list on Research using Tech Inc. equipment. Next in the series: SRM Extracts Acetic Acid with a Tech Inc. PES Hollow Fibre Membrane Contactor.

Published with our equipment? Send the reference to mail@techincresearch.com and we will feature your work. To discuss equipment for a similar study, call +1 (289) 622-1032 or write to mail@techincresearch.com.

Comments


bottom of page