Tin Sulfide-Coated PTFE Cuts Fouling in Leachate Distillation: a UTS Study with the AL-500

At a glance. A year after mapping how membrane distillation fouls at high recovery, the University of Technology Sydney team came back with a fix: a tin sulfide coating on PTFE that lowered fouling in landfill leachate at 80 and 90 per cent recovery. Once again, the Tech Inc. AL-500 porometer measured what happened inside the pores.
Why this matters
Landfill leachate is rich in organic and nitrogen compounds that stick to hydrophobic membranes. Fouling is what stops membrane distillation from being used more widely on such feeds. A coating that keeps the membrane cleaner, without wetting it, would extend run time and cut cleaning.
What the team did
Abdulaziz Khan, Ibrar Ibrar, Abeer Mirdad and Ali Altaee of UTS, with Raed Al-Juboori and IIT Guwahati's Priyamjeet Deka and Senthilmurugan Subbiah, coated PTFE membranes with tin sulfide and compared them with the uncoated membrane in air gap membrane distillation of landfill leachate. They confirmed the coating by electron microscopy, infrared and elemental analysis, contact angle and porosity measurements.
Where Tech Inc. came in
A coating can only help if it leaves the pores open. The team used the Tech Inc. AL-500 porometer to measure pore diameters on clean and fouled membranes, checking both that the tin sulfide layer did not close the pores and how much each membrane lost to fouling.
Results that stand out
The coated membrane fouled less: fouling factors of 10.4% to 13.1% against 14.4% to 16.5% for plain PTFE.
Fouling came from pore blocking and a cake of carbon- and nitrogen-rich compounds.
Rinsing with deionised water restored more than 97% of the flux of the coated membrane.
At 55 °C the coated membrane gave higher flux and better product water, and held its contact angle over time.
What it means for your lab
Surface modification work needs two numbers before anything else: did the contact angle change, and did the pores survive. We make both instruments: porometers and contact angle analysers. For distillation trials, see our membrane distillation test systems and test cells.
The paper
Khan, A., Ibrar, I., Mirdad, A. R., Al-Juboori, R. A., Deka, P., Subbiah, S. and Altaee, A. (2023). Novel approach to landfill wastewater treatment fouling mitigation: air gap membrane distillation with tin sulfide-coated PTFE membrane. Membranes 13(5), 483. doi:10.3390/membranes13050483
Read the full paper at the publisher for methods, data and figures.
Part of the Research with Tech Inc. series
This post is one of a series on published research made with Tech Inc. equipment and materials. See the full list on Research using Tech Inc. equipment. Next in the series: Seaweed Hydrogels for Clean Water: UTS Thesis Measures Pores with TECHPoro.
Published with our equipment? Send the reference to mail@techincresearch.com and we will feature your work. To discuss equipment for a similar study, call +1 (289) 622-1032 or write to mail@techincresearch.com.





Comments