top of page

Application Note: Closed Handling of Titanium Tetrachloride in Sponge and Pigment Plants

Writer: Tech Inc
Tech Inc
5 days ago
2 min read

At a glance. Titanium tetrachloride (TiCl4) is the intermediate between mineral sands and both titanium metal and chloride-route titanium dioxide pigment. It is a dense liquid that reacts with moisture in the air to form hydrochloric acid and a white cloud of titanium oxide. Every transfer, filter and sample point must therefore be closed, dry and vented to a scrubber.

Where TiCl4 is handled

  • Chlorination. Titanium feedstock is chlorinated and crude TiCl4 is condensed.

  • Purification. Solids are removed and impurities such as vanadium are treated and distilled out.

  • Use. Pure TiCl4 goes to the reduction reactors of a sponge plant, or to the oxidisers of a pigment plant.

Closed transfer

  1. Equipment is dried and purged with dry nitrogen before liquid is admitted.

  2. TiCl4 is moved by nitrogen pressure transfer or by sealless pumps with nitrogen-barrier seals.

  3. Filters and sight flow indicators sit in closed housings that can be isolated and purged before opening.

  4. Lines are blown down with nitrogen after transfer; vents and drains go to a caustic scrubber.

Materials

Carbon steel serves dry TiCl4 well and is widely used. Where moisture, hydrochloric acid or chlorine may be present, nickel alloys such as Alloy 600 or C-276 are safer. Gaskets, seals and instrument wetted parts are chosen for chloride service. The licensor's material rules come first.

Sampling

Quality samples are taken in closed sampling panels that fill a sealed container without exposing the operator, with nitrogen purge before and after.

Where Tech Inc. equipment fits

Related reading

Sources

This note is general information. Equipment follows the licensor's process and material rules and the plant's safety case.

Comments


bottom of page