Process Note: Recovering NMP from Battery Electrode Coating

At a glance. In lithium-ion cell plants, the cathode slurry is usually made with N-methyl-2-pyrrolidone (NMP) as the solvent. The coated foil passes through long drying ovens where the NMP evaporates into hot air. Recovering that NMP and purifying it for reuse cuts solvent cost sharply and keeps emissions within limits.
How recovery works
Exhaust collection. Hot, NMP-laden air leaves the coater dryer zones.
Heat recovery. An air-to-air exchanger preheats fresh dryer air with the hot exhaust.
Condensation. Cooling coils and a chilled condenser drop the air temperature so most of the NMP condenses. A demister catches droplets.
Polishing the air. Remaining vapour can be taken out by a water scrubber or adsorption before the air is released or returned.
Distillation. Crude NMP, which contains water and some impurities, is distilled under vacuum back to coating grade.
Return. The purified NMP is checked against the specification and returned to the slurry mixers.
Design points
Size to the coater. Exhaust flow, NMP load and operating hours set the size of every stage.
Recovery rate. Well-designed systems recover the large majority of the NMP; the target is set at design.
Purity. Water and impurity limits for reuse are agreed with the cell maker.
Safety. NMP vapour concentration in the dryer and exhaust is kept below flammable limits.
Start small. Pilot coating lines and labs can begin with a compact unit and scale up with the line.
Electrolyte handling
Later in the cell process, electrolyte is filled into the cells. Electrolyte reacts with moisture to form hydrofluoric acid, so it is moved only in closed systems under dry argon or nitrogen, through fine PTFE filters, with every batch weighed and recorded.
Where Tech Inc. equipment fits
Tech Inc. builds the NMP solvent recovery unit and the electrolyte closed-transfer and filling skid, as well as the falling-film solvent recovery skid and nitrogen generator skids.
Related reading
Sources
This note is general information. Each recovery system is sized to the coating line and the plant's emission permit.





Comments