top of page

Process Note: Recovering Battery Metals from Black Mass by Hydrometallurgy

Writer: Tech Inc
Tech Inc
10 hours ago
2 min read

At a glance. Spent lithium-ion batteries are discharged, shredded and separated into metal foils, plastics and a fine powder called black mass, which contains the cathode and anode materials. Hydrometallurgy dissolves the valuable metals and separates them into products that can go back into new batteries. Recyclers and research groups across the world develop and optimise these flowsheets at pilot scale before committing to a plant.

How the process works

  1. Pre-treatment. Black mass may be roasted or washed to remove binders, electrolyte residues and graphite before leaching.

  2. Leaching. The black mass is dissolved in acid, commonly sulfuric acid with a reductant such as hydrogen peroxide, in stirred tanks at controlled temperature. Graphite and other insolubles are filtered off.

  3. Impurity removal. Iron, aluminium and copper are removed by pH adjustment and precipitation, or by cementation and ion exchange.

  4. Solvent extraction. In mixer-settlers, organic extractants selectively pull individual metals from the solution. Typical sequences separate manganese and other impurities first, then cobalt from nickel, using staged extraction, scrubbing and stripping.

  5. Crystallisation. Purified nickel, cobalt and manganese sulfate solutions are concentrated and crystallised into battery-grade salts.

  6. Lithium recovery. Lithium stays in the raffinate and is recovered, often as lithium carbonate by precipitation, or as lithium hydroxide.

  7. Water and reagent recovery. Membrane concentration and evaporation recover water and reduce effluent.

What a pilot line answers

  • Leach efficiency and reagent consumption for a specific black mass, which varies with battery chemistry and pre-treatment.

  • Stage counts and phase ratios in solvent extraction, and how cleanly each metal separates.

  • Product purity against battery-grade specifications.

  • Filtration rates and cake washing for the leach residue and precipitates.

  • Mass and water balances needed to design a full plant.

Common problems

  • Crud and entrainment in mixer-settlers, which carries organic into aqueous streams.

  • Incomplete impurity removal, which contaminates downstream products.

  • Variable feed, because black mass from different battery types behaves differently.

  • Fine solids that filter slowly and lose metal in the cake.

Where Tech Inc. equipment fits

Related reading

This note is general guidance. Flowsheets are developed for each feed, and plants are designed to the project's data and the applicable codes and standards.

Comments


bottom of page