top of page

ISO 15848 Explained: Fugitive Emission Classification and Type Testing of Industrial Valves

Writer: Tech Inc
Tech Inc
29 minutes ago
2 min read

ISO 15848-1:2015, Industrial valves — Measurement, test and qualification procedures for fugitive emissions — Part 1: Classification system and qualification procedures for type testing of valves (edition 2, amendment 1 in 2017, confirmed 2020) qualifies a valve design; Part 2 covers production acceptance tests on individual valves. ISO's abstract says Part 1 specifies testing, measurement and qualification procedures for external leakage from valve stem seals (or shafts) and body joints of isolating and control valves intended for volatile air pollutants and hazardous fluids; end-connection joints, vacuum service, corrosion effects and radiation are excluded.

What it covers

A valve is cycled mechanically (hundreds to tens of thousands of cycles depending on the endurance class) and thermally, while stem leakage is measured by helium (vacuum, flushing or sniffing methods) or methane (sniffing). The result is a classification string that names the tightness class, the endurance class, the temperature class and the test fluid, so that a purchaser can ask for exactly the performance the plant needs and compare bids on the same basis.

Our commentary

  • Type test versus production test. Part 1 proves the design once; Part 2 is the shop test on each valve, with simpler fluids and shorter procedures. A specification should call for both where emissions matter.

  • Helium and methane classes are not interchangeable; the tightness class letters differ by fluid, and a helium result cannot be converted to a methane ppm by a factor.

  • Packing is a system: stem finish, gland design, live loading and the packing material together achieve the class; replacing the packing with a "low-E" grade in the field does not re-qualify the valve.

  • API 624 and API 641 are the API counterparts for rising-stem and quarter-turn valves respectively, with methane as the fluid; many end users specify one of them alongside ISO 15848.

Our equipment

Send your application, materials and the standards your contract names to mail@techincresearch.com or call +1 (289) 622-1032, and we will return a configuration, datasheet and quotation.

This article is our commentary on the standard's published scope, not a substitute for the standard itself; always work to the current edition named in your contract. Equipment specifications may change; performance depends on the application, how the equipment is used and operation in line with the operation manual.

Sources

Comments


bottom of page