top of page

CIPET Bhubaneswar Builds a Plant-Based Absorbent Membrane on a Tech Inc. Casting Machine

Writer: Tech Inc
Tech Inc
14 hours ago
3 min read

At a glance. Researchers at CIPET Bhubaneswar have turned the seed gel of Mimosa pudica, the touch-me-not plant, into an absorbent membrane for sanitary products. The membrane absorbs more than four times its own weight in saline, more than five times in blood, and breaks down in soil. Every sheet in the study was cast on Tech Inc. membrane casting equipment.

Why this matters

Most sanitary pads rely on superabsorbent polymers and plastic layers made from petroleum. They work, but they persist in landfill for decades. A biodegradable absorbent core that performs as well is one of the open problems in hygiene materials, and India, with its large market and push for sustainable products, is a natural place to solve it.

What the team did

Roshni Pattanayak, Sukanya Pradhan and Smita Mohanty, of CIPET's School for Advanced Research in Petrochemicals with Utkal University, extracted a hydrogel from Mimosa pudica seeds, dried it to a powder and blended it into a modified cellulose acetate dope. They then formed membranes by non-solvent induced phase separation: the dope was cast as a thin film on Tech Inc. casting equipment and immersed in a water bath, where the polymer solidifies into a porous sheet.

They varied the hydrogel loading, then tested absorbency in distilled water, saline and sheep blood, absorbency under load, strength, thermal behaviour, antibacterial activity and biodegradation in soil.

Where Tech Inc. came in

A filled dope is harder to cast than a plain polymer solution. Powder particles drag on the blade, and any change in film thickness changes how fast the solvent leaves, which changes the pore structure. The team cast every membrane on a Tech Inc. membrane casting machine, which draws the film at a set blade gap and a steady speed. That is what makes a comparison between 0.5, 1 and 2 per cent loadings meaningful: the only thing that changes from sheet to sheet is the formulation.

Results that stand out

  • The 1 wt% hydrogel membrane (MCA-2) gave the best performance across every test.

  • Saline absorbency reached 402.87% in 30 minutes, about 193% higher than plain cellulose acetate.

  • Sheep blood absorbency reached 572.5% in 30 minutes.

  • Under load it still held 439.69% saline after 60 minutes, 254.8% more than plain cellulose acetate.

  • Tensile strength rose from 1.29 to 2.45 MPa and elongation at break from 3.23% to 13.67%.

  • The membrane showed antibacterial activity against E. coli and S. aureus, and soil burial over 180 days showed clear degradation, with Bacillus species identified as the main degraders.

What it means for your lab

Absorbent, wound-care and hygiene membranes are a growing field for polymer groups that already cast filtration membranes. The same lab flat sheet casting machine handles cellulose acetate, PVDF, PES and filled dopes, and our membrane polymers include cellulose acetate grades. If humidity affects your results, read our note on humidity control during membrane casting.

The paper

Pattanayak, R., Pradhan, S. and Mohanty, S. (2024). Utilization of green resource-based Mimosa pudica hydrogel powder in a cellulose acetate-based polymeric membrane as absorbent: a sustainable approach towards female hygiene application. RSC Sustainability. doi:10.1039/d4su00381k

Read the full paper at the publisher for methods, data and figures.

Part of the Research with Tech Inc. series

This post is one of a series on published research made with Tech Inc. equipment and materials. See the full list on Research using Tech Inc. equipment. Next in the series: UTAR and UTP Cast a PVDF and Activated Carbon Membrane for Landfill Leachate.

Published with our equipment? Send the reference to mail@techincresearch.com and we will feature your work. To discuss equipment for a similar study, call +1 (289) 622-1032 or write to mail@techincresearch.com.

Comments


bottom of page