BITS Pilani Lifts CO2 Permeability 23-Fold with Tech Inc. Polysulfone and MOFs

At a glance. Upgrading biogas to vehicle fuel means stripping out its carbon dioxide. At BITS Pilani, Aditya Jonnalagedda and Bhanu Vardhan Reddy Kuncharam loaded polysulfone, bought from Tech Inc., with two indium-based metal-organic frameworks, and raised CO2 permeability from 6.3 to 144 Barrer while improving selectivity.
Why this matters
Raw biogas is roughly 60 per cent methane and 40 per cent carbon dioxide. Membranes are the simplest way to upgrade it, but glassy polymers such as polysulfone face a trade-off: more permeable usually means less selective. Mixed matrix membranes add porous fillers to break that trade-off. See our overview of gas separation membranes.
What the team did
The team synthesised a three-dimensional MOF, MIL-68(In)-NH₂, and a two-dimensional one, In(aip)₂, and dispersed each in polysulfone at several loadings. They characterised the fillers and membranes by XRD, FTIR, FESEM, BET and DSC, then measured permeation with a 60:40 CO₂:CH₄ mixture that mimics biogas, and ran 72-hour stability tests.
Where Tech Inc. came in
The polysulfone polymer beads came from Tech Inc. In mixed matrix work the base polymer sets the baseline every filler is judged against, so a consistent, well-specified grade matters. Our membrane polymers include polysulfone, PES, PVDF, polyimide and cellulose acetate.
Results that stand out
Neat polysulfone gave 6.3 Barrer CO₂ permeability and a CO₂/CH₄ selectivity of 8.7.
At 20 wt% In(aip)₂, permeability rose to 144 Barrer, about 23 times the neat polymer.
At 10 wt% In(aip)₂, selectivity reached 24.4.
The best MIL-68(In)-NH₂ membrane reached a selectivity of 19.8.
Long-term tests over 72 hours assessed the membranes against commercial requirements.
What it means for your lab
Gas separation research needs reliable polymer, a way to cast dense films and a permeation rig. We supply the polymers, casting machines and gas permeation test systems, and our gas permeability testing service can measure your films. See also mixed gas permeation testing.
The paper
Jonnalagedda, A. and Kuncharam, B. V. R. (2025). Novel mixed matrix membranes with indium-based 2D and 3D MOFs as fillers and polysulfone for CO2/CH4 mixed gas separation. RSC Advances. doi:10.1039/d4ra08557d
Read the full paper at the publisher for methods, data and figures.
Part of the Research with Tech Inc. series
This post is one of a series on published research made with Tech Inc. equipment and materials. See the full list on Research using Tech Inc. equipment. Next in the series: SRM Tunes PVDF Distillation Membranes with Tech Inc. Polymer and Contact Angle Meter.
Published with our equipment? Send the reference to mail@techincresearch.com and we will feature your work. To discuss equipment for a similar study, call +1 (289) 622-1032 or write to mail@techincresearch.com.





Comments