ASTM D6161 Explained: The Terminology of Microfiltration, Ultrafiltration, Nanofiltration and Reverse Osmosis

ASTM D6161, Standard Terminology Used for Microfiltration, Ultrafiltration, Nanofiltration, and Reverse Osmosis Membrane Processes (current edition D6161-19) is short, has no test in it, and is referenced by almost every other membrane standard. ASTM's scope says it covers the use of the four pressure-driven membrane processes; what it actually does is fix the meaning of the terms the industry argues about.
Why a terminology standard matters
A tender that asks for "95 % rejection" means nothing until the feed, the solute and the basis (concentration or mass) are defined. "Flux" is a rate per unit area, and the area can be the active area or the nominal element area. "Recovery" is permeate over feed, but in a batch test it changes with time. D6161 gives each of these a single definition so that a datasheet, a pilot report and an acceptance test can be compared. Among the terms it defines are the four processes themselves (by the size and nature of what they retain), permeate, concentrate, flux, recovery, rejection and salt passage, transmembrane pressure, molecular weight cut-off, fouling and scaling, flux decline, cleaning in place, element, module and array.
Our commentary: the terms that cause disputes
MWCO is a nominal rating, defined by the retention of a marker solute, and two makers' 10 kDa membranes can retain a protein differently. Our MWCO testing systems measure it on your own solutes.
Flux at what temperature and pressure? D6161 defines flux; it is our normalisation practice (ASTM D4516 for RO) that makes two flux values comparable. Report the temperature correction you used.
Specific flux (permeability) is the number that survives a change of pressure; we report it alongside flux on every test.
Rejection versus passage. 99.5 % rejection and 0.5 % passage are the same number, but a drop from 99.5 to 99.0 % rejection doubles the salt passage. Follow the passage when tracking a membrane's decline.
Our equipment
Laboratory and pilot membrane testing systems for RO, NF, UF and MF, UF modules, membrane integrity testers and the calculators that apply these definitions. All our standards guides.
Send your application, materials and the standards your contract names to mail@techincresearch.com or call +1 (289) 622-1032, and we will return a configuration, datasheet and quotation.
This article is our commentary on the standard's published scope, not a substitute for the standard itself; always work to the current edition named in your contract. Equipment specifications may change; performance depends on the application, how the equipment is used and operation in line with the operation manual.
Sources
ASTM International, ASTM D6161 Standard Terminology Used for Microfiltration, Ultrafiltration, Nanofiltration, and Reverse Osmosis Membrane Processes, standard summary page.





Comments