top of page

Application Note: Servicing Struts, Accumulators and Tyres with Nitrogen

Writer: Tech Inc
Tech Inc
5 days ago
2 min read

At a glance. Oleo-pneumatic landing-gear struts, hydraulic accumulators, aircraft tyres and gas springs all carry a charge of dry nitrogen. Nitrogen is inert, dry and does not support combustion, so it protects seals and wheels and avoids moisture inside the component. Each charge must be set to the value in the maintenance manual, and it falls in service, so maintenance teams recharge often.

Typical tasks

  • Struts. The strut is charged to the pressure the manual gives for its extension or load, often read from a chart.

  • Accumulators. The pre-charge is checked with the hydraulic side at zero pressure and topped up to the specified value.

  • Tyres. Aircraft tyres are inflated with nitrogen to the rated pressure, cold.

  • Gas springs and shock absorbers on machines and vehicles follow the same pattern.

What the cart does

  1. Supply. Nitrogen cylinders on the cart feed an inlet manifold with a filter.

  2. Boost. When the required pressure is above what the cylinders can give, an air-driven or electric booster raises it, often to about 350 bar.

  3. Set. Coarse and fine regulators let the technician approach the target pressure in small steps, read on a calibrated test gauge.

  4. Vent and disconnect. A vent valve empties the hose before it is disconnected from the charging valve.

Safety and accuracy

  • Relief valves on every pressure stage, so a failed regulator cannot over-pressurise a component.

  • Hoses and adapters rated well above working pressure and matched to the component's charging valve.

  • Calibrated gauges with a known accuracy class, rechecked on a fixed interval.

  • Oil-free nitrogen path: the booster's drive air never mixes with the gas.

Where Tech Inc. equipment fits

Related reading

Sources

This note is general information. Charge pressures and procedures always come from the aircraft or component maintenance manual.

Comments


bottom of page