Application Note: Hydrogenating Glucose to Sorbitol, Maltitol and Mannitol

At a glance. Maize and wheat starch plants turn starch into glucose and maltose syrups, and hydrogenate them to sugar alcohols: sorbitol for food, toothpaste, pharmaceuticals and vitamin C, maltitol for sugar-free confectionery, and mannitol for tablets. Hydrogenation is a high-pressure step with hydrogen and a powder catalyst, followed by careful purification.
Hydrogenation
Feed. A refined glucose or maltose syrup, typically around half dissolved solids, is charged to the reactor with the catalyst, usually a nickel catalyst or ruthenium on carbon.
Reaction. With the reactor purged and filled with hydrogen, the batch is held at elevated temperature and high pressure. A gas-inducing agitator keeps hydrogen dispersed through the liquid, and the hydrogen panel logs uptake.
End point. When uptake stops and the reducing sugars have fallen to the specification, the batch is cooled and vented.
Catalyst and purification
Catalyst removal. The batch passes through a closed candle or leaf filter that holds the catalyst for reuse.
Polishing. Carbon treatment and fine filtration take out colour and traces of catalyst.
Ion exchange. Removes dissolved metals such as nickel and other ions.
Concentration. Evaporation brings the solution to the commercial strength, commonly about 70% for sorbitol solution; crystalline grades go on to crystallisation and drying.
Design points
High design pressure, hydrogen safety (purging, venting, detection, flame arrestors), good gas dispersion, accurate uptake measurement, and closed catalyst handling because many hydrogenation catalysts are pyrophoric.
Where Tech Inc. equipment fits
Tech Inc. builds the batch hydrogenation reactor for oils and polyols, the closed catalyst candle filter skid, the pressure leaf filter skid and, for process development, continuous hydrogenation skids.
Related reading
Sources
This note is general information. Reaction conditions come from the client's or licensor's process.





Comments