PED 2014/68/EU and CE Marking Explained: Pressure Equipment for the European Market

In the European Economic Area (and, with the UKCA mark, the UK), pressure equipment is placed on the market under the Pressure Equipment Directive 2014/68/EU (PED). It is law, not a design code: it sets the essential safety requirements and the conformity assessment route, and leaves the engineering to harmonised standards.
Scope and categories
PED applies to vessels, piping, safety accessories and pressure accessories with a maximum allowable pressure above 0.5 bar. Equipment is sorted by fluid group (Group 1 dangerous fluids, Group 2 all others), by state (gas or liquid) and by the product of pressure and volume (or pressure and nominal size for piping), into categories I to IV using the directive's tables. Equipment below the category thresholds is designed and manufactured to sound engineering practice (SEP), may not carry the CE mark for PED, and is accompanied by instructions.
Conformity assessment
The category sets the module: Category I is the manufacturer's own control; Categories II to IV involve a notified body to an increasing degree, from production surveillance to EU-type examination and unit verification. The outcome is the EU declaration of conformity and the CE mark, with the notified body number for Categories II and above. Materials must be in a harmonised standard, a European Approval for Materials, or a particular material appraisal; EN 10204 3.1 certificates (3.2 in some cases) are the norm.
Harmonised standards
EN 13445 (unfired pressure vessels), EN 13480 (metallic industrial piping), EN 12952/12953 (boilers) and EN ISO 4126 (safety devices) give presumption of conformity; a vessel designed to ASME Section VIII can be CE-marked if the notified body accepts the design against the essential safety requirements, which is routinely done.
What it means for our equipment
Reactors, autoclaves and skids delivered into the EEA are categorised under PED; SEP equipment is documented as such, and Category I to IV equipment is delivered with the declaration of conformity, the notified body involvement the category requires, and a technical file. Our standard high-pressure reactor range, benchtop stirred reactors and skids are supplied this way through our European entity; the ASME Section VIII guide covers the North American route. All our standards guides.
Send your application, materials and the standards your contract names to mail@techincresearch.com or call +1 (289) 622-1032, and we will return a configuration, datasheet and quotation.
This article is our commentary on the standard's published scope, not a substitute for the standard itself; always work to the current edition named in your contract. Equipment specifications may change; performance depends on the application, how the equipment is used and operation in line with the operation manual.
Sources
European Union, Directive 2014/68/EU on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment, EUR-Lex.
European Commission, Pressure equipment sector, official page.





Comments