top of page

Filtering Paint, Resin and Ink: Bags, Cartridges or Self-Cleaning Filters

Writer: Tech Inc
Tech Inc
5 days ago
2 min read

At a glance. Paint, resin, ink and coating colour are filtered before filling to remove gel particles, undispersed pigment, skins and dirt. The right filter type depends on how much dirt there is, how fine the finish must be and how continuous the line runs. Getting it right cuts rejects and filter cost together.

The three main options

Filter

Best for

Watch out for

Bag filters

High dirt loads, coarse to medium ratings, low cost

Bypass at poor seals; operator contact at change-out

Cartridge filters

Fine final filtration before filling

Higher element cost; blinding on gels

Self-cleaning filters

Continuous, high-volume lines

Higher capital cost; screen ratings not as fine

Many plants combine them: a self-cleaning or bag stage removes the bulk, and a cartridge polishes before the filler.

Sizing for viscous products

  • Viscosity drives everything. Pressure drop rises with viscosity, so housings and element areas are sized at the highest viscosity expected.

  • Pumps. Positive-displacement pumps suit viscous and shear-sensitive products; centrifugal pumps suit thin products.

  • Rating. Choose the coarsest rating that meets the finish. Too fine a rating blinds quickly and removes wanted solids such as pigment.

  • Duplex housings keep the line running during element changes.

  • Solvent-based products need flameproof motors and earthing.

Running cost

Element consumption is usually the biggest running cost. Tracking differential pressure, changing elements at the right point and choosing elements with high dirt capacity give the best cost per tonne filtered.

Wash solvent

Cleaning solvent from tanks, lines and filling machines can be recovered by distillation and reused, which cuts both purchases and waste.

Where Tech Inc. equipment fits

Related reading

Sources

This guide is general information. A trial with the actual product is the best way to confirm the filter rating.

Comments


bottom of page