top of page

Gases Worth Keeping: Helium Recovery, Refrigerant Reclamation, Calibration Blends and Hydrogen Backup

Writer: Tech Inc
Tech Inc
5 days ago
2 min read

At a glance. Some gases are too scarce or too costly to vent, and some must be prepared with great accuracy. Four kinds of skid deal with them: helium recovery for laboratories and leak testing, refrigerant reclamation for service companies, gravimetric blending for calibration gas, and hydrogen supply for fuel-cell backup power.

Helium recovery

The 2026 supply disruption showed how exposed helium users are. Instruments, magnets and leak-test chambers that vent helium can send it back instead:

  1. Collect. Returns flow to a gas bag or buffer vessel.

  2. Compress. A compressor raises the pressure and an after-cooler removes heat and water.

  3. Purify. Adsorption, membrane or cryogenic purification removes air, moisture and oil; an analyser checks the purity.

  4. Store. Clean helium is filled into cylinders or a bank for reuse, or sent to a liquefier.

Refrigerant reclamation

The phase-down of HFCs makes used refrigerant worth reclaiming. The skid evaporates the refrigerant to leave oil behind, removes moisture and acid in filter-driers, purges air and other gases through a condenser that keeps refrigerant losses low, and fills the clean product into cylinders by weight. A sample is tested against the reuse standard, such as AHRI 700, before it is sold.

Calibration gas by weight

In gravimetric blending, each cylinder is heated and evacuated, weighed empty, and weighed again after each component is added. The composition follows from the masses, and the software calculates the uncertainty. ISO 6142-1 describes the method; the laboratory then verifies the mixture against reference standards.

Hydrogen for backup fuel cells

Fuel cells give long, quiet backup at telecom towers and data centres, provided hydrogen is there when the grid fails. A supply skid manifolds cylinders or bundles in duty and reserve banks, changes over automatically, filters the gas and reduces it to the fuel cell's inlet pressure, and reports the remaining stock to the site system.

Where Tech Inc. equipment fits

Related reading

Sources

This guide is general information. Gas systems follow the applicable codes, the gas supplier's requirements and the site's hazardous-area classification.

Comments


bottom of page