top of page

Grease Fitting Protectors: Small Caps That Protect Bearings

Writer: Tech Inc
Tech Inc
5 days ago
1 min read

At a glance. Every grease fitting left uncovered collects dust. When the gun is connected, that dust goes into the bearing. Tech Inc. Grease Fitting Protectors and Fitting Kits cap each fitting, keep it clean, and use colour to show which grease the point takes.

Why they matter

  • Clean fittings mean clean grease in the bearing.

  • Colour matches the grease gun, so the wrong grease is not used.

  • Clear-lens caps show grease condition without removing anything.

What to include

  • Protectors in the sizes used on your plant, in the colours of your grease list.

  • An 80-piece SAE or metric fitting kit for replacing damaged fittings during a round.

  • A four-way tool and fitting unblocker for seized or blocked points.

Frequently asked questions

Do protectors slow the round down? No. They lift off by hand and show the grease at a glance, which usually speeds the round up.

Which points come first? Points in dusty or wet areas, and critical motors and fans.

Contact mail@techincresearch.com for kits matched to your grease list.

Comments


bottom of page