Fermentation CO2 Recovery: One of the Best Investments a Brewery or Distillery Can Make

At a glance. Every fermentation releases carbon dioxide, and most breweries and distilleries vent it, then buy CO2 back for carbonation, bottling and blanketing. The Tech Inc. Fermentation CO2 Recovery Skid collects that gas, cleans it and liquefies it for reuse. It turns a waste stream into a supply, which makes it one of the best investments a brewery or distillery can make.
How the recovery train works
Foam trap and buffer collect the gas from the fermenters.
Water scrubber removes alcohol and water-soluble impurities.
Oil-free compressor raises the pressure.
Activated-carbon filters and dryer remove odours and moisture.
Liquefier and purification column produce liquid CO2.
Storage tank and vaporiser hold the CO2 and deliver it to the plant.
Configurations
Package | Use |
Brewery package | Sized to the fermentation profile of the brewhouse |
Distillery package | Distillery and ethanol plant fermenters |
Compressed-gas recovery | Compression and drying for direct use, without liquefaction |
Why it is one of the best things to happen to breweries and distilleries
Your own CO2 supply. No dependence on bought-in deliveries.
Quality you control. Purification to the plant's own requirement.
Lower emissions. Process CO2 is reused instead of vented.
One package. Scrubbing, compression, drying and liquefaction on one skid, with PLC and remote monitoring.
Where it fits
Breweries, whisky and grain distilleries, ethanol plants and beverage bottlers. At the point of use, Tech Inc. also supplies CO2 polishing cartridges from its food-grade filter range.
Frequently asked questions
Can recovered fermentation CO2 be used in beverages?
Yes, once it is scrubbed, filtered, dried and purified to the plant's quality requirement.
How is the skid sized?
To the fermentation CO2 flow and the plant's daily CO2 use.
Do I need liquefaction?
Not always. Plants that use CO2 close to the fermenters can take compressed, dried gas directly.
Send your fermentation volumes and CO2 use to mail@techincresearch.com or call +1 (289) 622-1032 for a process proposal and quotation.





Comments