Ex-Proof Pilot Plants: What Changes from the Laboratory Reactor

At a glance. A pilot plant sits between the laboratory reactor and the production plant. Its job is to produce the data that the full-scale design needs: heat release and removal, dosing profiles, mixing, and how the product responds. At 1 to 50 L, with flammable solvents and gases, it also has to be designed for a hazardous area, with certified equipment and safeguards that a lab reactor in a fume cupboard does not need.
What changes with scale
Heat removal – surface area per volume falls as the reactor grows, so exothermic reactions need the jacket and dosing rate designed together.
Dosing – feeds are dosed by weight on load cells or by mass-flow controllers, so the recipe can be scaled exactly.
Mixing – agitator type, speed and power are chosen to match the full-scale vessel, not just to stir.
Data – every temperature, pressure, weight and flow is logged, because scale-up is done from the data.
Hazardous-area design
The pilot hall is classified into zones by how often a flammable atmosphere may be present, following IEC 60079-10-1. Motors, instruments and valves in those zones carry certification for the zone and gas group; within the EU, equipment for explosive atmospheres falls under the ATEX directive.
Safeguards
A hazard review sets the interlocks: high temperature and pressure trips, dosing stops, emergency cooling, and a bursting disc to a catch tank for runaway cases. Alkoxylation and hydrogenation need particular care with oxide and hydrogen feeds.
Specification checklist
Chemistry, batch size and the scale-up data needed
Pressure, temperature and materials
Feeds and how they are dosed
Area classification and gas group
Interlocks from the hazard review, and data export format
Where Tech Inc. equipment fits
Tech Inc. builds Ex-proof automated pilot plants, stirred high-pressure reactors, continuous flow reactor skids and batch hydrogenation reactors.
Related reading
Sources
This guide is general information. Each pilot plant is designed to the client's chemistry, hazard review and area classification.





Comments