Process Note: How Vacuum Dealcoholisation Keeps the Taste

At a glance. Alcohol boils at a lower temperature than water, so it can be distilled out of a drink. At normal pressure that needs heat that would cook the flavour. Under vacuum, the same separation runs at low temperature. Capturing the aroma compounds first and adding them back keeps the drink close to the original.
The steps
Deaeration. Dissolved gases are removed so the vacuum system runs steadily.
Aroma recovery. The most volatile aroma compounds are stripped off first and condensed separately.
Vacuum distillation. In a column or falling-film evaporator under deep vacuum, alcohol is removed at low temperature.
Cooling. The dealcoholised product is cooled straight away.
Blend-back. The recovered aroma is dosed back in, and the product may be recarbonated.
Measurement. Inline alcohol measurement confirms the product is below the target, commonly 0.5% ABV.
Why vacuum distillation
It reaches very low alcohol levels.
It handles beer, wine, cider, kombucha and malt drinks on one plant with different recipes.
It needs no membranes and runs on proven evaporator technology.
The removed alcohol can be collected for other use.
Membrane routes such as reverse osmosis are also used; the choice depends on product, scale and target alcohol level.
Design points
Temperature. As low as the vacuum allows, set per product.
Residence time. Short, so the product spends little time warm.
Hygiene. 316L sanitary construction with cleaning-in-place.
Utilities. Chilled water for condensers and coolers, hot water or steam for the evaporator.
Where Tech Inc. equipment fits
Tech Inc. builds the vacuum dealcoholisation skid, the spirit chill-filtration skid and the falling-film solvent recovery skid, and supplies food-grade filter cartridges and sheets.
Related reading
Sources
This note is general information. Labelling limits for alcohol-free and low-alcohol drinks vary by country.





Comments