Colour-Coded Oil Transfer Containers: The Cheapest Fix for Dirty Oil

At a glance. Open buckets, shared funnels and rags let dust and water into oil on the way to the machine. The Tech Inc. Colour-Coded Oil Transfer Containers and Lids keep oil sealed from the lube room to the fill point, and the colour tells the technician which oil goes where. For most plants they are the cheapest single step towards cleaner oil and fewer failures.
What goes wrong with open containers
Dirt and water fall into open buckets and funnels.
Mixed oils: one funnel used for two oils leaves residue that changes additive performance.
Over-filling and spills waste oil and leave slippery floors.
How the system works
One sealed, graduated container per lubricant, from 1.5 to 10 L.
A lid chosen for the fill point: storage, utility, stretch spout, mini or stumpy spout, or a pump lid for raised points.
Colour and label matched to the machine tag, so the right oil always goes in.
Choosing sizes and lids
Use 1.5 to 3 L for small gearboxes and bearings, 5 to 10 L for reservoirs and large gearboxes.
Use spout lids for light oils and tight access, utility or pump lids for heavy oils up to ISO VG 680.
Keep one spare container per oil so the next round never waits for cleaning.
Frequently asked questions
How many colours do we need? One per lubricant in regular use. Most plants need six to ten.
Do the containers need cleaning? Rarely, because each container only ever holds one oil and stays sealed.
Send your lubricant list to mail@techincresearch.com and we will return a colour-coding plan and quotation.





Comments