ASTM D97, D5950 and D93 Explained: Pour Point and Flash Point of Fuels and Lubricants

ASTM D97, Standard Test Method for Pour Point of Petroleum Products and its automatic equivalent ASTM D5950 (Automatic Tilt Method) (D5950-25) give the lowest temperature at which an oil still flows. ASTM D93, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester (D93-26) gives the lowest temperature at which its vapour ignites in a closed cup.
What they cover
In D97 the sample is cooled in steps and the test jar tilted at each 3 °C interval until the surface no longer moves; the pour point is reported 3 °C above that temperature. ASTM's scope for D5950 describes the automated version, an instrument that tilts the jar during cooling and detects surface movement optically, covering −66 °C to +51 °C with results at 1 °C or 3 °C intervals; it is not intended for crude oils. D93 covers distillate fuels, lubricating oils, residual fuels and other liquids, with procedures that differ by viscosity and by whether the sample contains suspended solids or forms a surface film; ISO 2719 is the international equivalent.
Our commentary
Pour point sizes the heat tracing. A fuel oil or waxy crude stored below its pour point will not leave the tank; heater duty, insulation and line tracing are chosen from it with a margin, because the test is on a quiescent sample and a pipeline needs flow.
Cloud point comes first. Wax crystals form (D2500) well above the pour point and block filters long before the oil gels; filtration skids on diesel and fuel oil are sized for the cloud point, not the pour point.
Flash point sets the hazardous-area class of tanks and skids (IEC 60079), the choice of electrical equipment and the safe temperature for heated storage, which must stay below the flash point by a margin.
Flash point drops with contamination. A lube oil whose flash point has fallen is diluted with fuel; a sample with a high reading may have lost light ends during sampling, so a closed sampler matters.
Our equipment
Fuel oil heating and pumping skids, thermic fluid heater skids, diesel fuel polishing skids, electric circulation heater skids and closed samplers. All our standards guides.
Send your application, materials and the standards your contract names to mail@techincresearch.com or call +1 (289) 622-1032, and we will return a configuration, datasheet and quotation.
This article is our commentary on the standard's published scope, not a substitute for the standard itself; always work to the current edition named in your contract. Equipment specifications may change; performance depends on the application, how the equipment is used and operation in line with the operation manual.
Sources
ASTM International, ASTM D97 Standard Test Method for Pour Point of Petroleum Products, standard summary page.
ASTM International, ASTM D5950 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method), standard summary page.
ASTM International, ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester, standard summary page.





Comments