Starting a Lubrication Programme: From Drum to Machine

At a glance. Clean, correct lubrication depends on every step between the drum and the machine. Here is the order most plants follow, with the equipment for each step.
1. Identify
Give each lubricant a colour and symbol and label everything with a lubricant identification system.
2. Store
Move from drums to sealed, filtered storage in a bulk oil storage and dispensing work centre, a lube room or a containerised shelter. Put remaining drums on spill pallets with barrel pumps.
3. Transfer
Carry oil in sealed, colour-coded transfer containers, and use lid-mounted hand pumps for raised fill points.
4. Apply grease correctly
One colour-coded grease gun per grease, metered volumes, and fitting protectors on every point.
5. Keep contamination out
Fit desiccant breathers and quick-connects, and check oil with sight glasses and sample ports.
6. Clean what is already dirty
Use a mobile filtration cart or dehydrator to bring in-service oil back to target cleanliness.
Frequently asked questions
Where should we start? With identification and sealed transfer containers: they cost least and stop most mistakes.
How do we measure progress? Oil analysis from fixed sample ports, against target cleanliness codes.
Send your lubricant list to mail@techincresearch.com for a plan.





Comments