ASTM G48 Explained: Pitting and Crevice Corrosion Tests for Stainless and Duplex Steels

Chloride pitting and crevice corrosion are the main threats to stainless and duplex steels in seawater and brines. ASTM G48 provides laboratory tests that rank alloys and qualify welds against them. The current edition is G48-25.
What it covers
ASTM's published scope describes six procedures, Methods A to F, using ferric chloride solution as an oxidising chloride environment:
Method A: pitting resistance;
Method B: pitting and crevice resistance;
Methods C and E: critical pitting temperature;
Methods D and F: critical crevice temperature.
They apply to stainless steels and related nickel-base and chromium-bearing alloys, and can show the effects of alloying, heat treatment and surface finish. The results can rank alloys by their resistance to pitting and crevice corrosion initiation.
Our commentary: why welds are tested
Base metal from a good mill usually performs; welds are where problems start. Too much heat input, the wrong filler or poor shielding can upset the ferrite–austenite balance in duplex steels or form intermetallic phases that weaken corrosion resistance. Qualifying the weld procedure with a ferric chloride test, together with a ferrite count and a test for intermetallic phases such as ASTM A923, shows the welds will stand up to seawater.
How the tests are used in orders
Purchasers often specify a G48 method, test temperature and acceptance criteria (for example, no pitting and a maximum weight loss) in the material or weld procedure specification.
Critical temperature methods are used to compare alloys or to confirm that an alloy grade performs as expected.
Tech Inc. equipment
Super-Duplex Seawater Cooler: super duplex (UNS S32750) for every seawater-wetted part; weld procedures qualified with ferrite count and ASTM A923 and ASTM G48 corrosion tests.
Send your application, materials and the standards your contract names to mail@techincresearch.com or call +1 (289) 622-1032, and we will return a configuration, datasheet and quotation.
This article is our commentary on the standard's published scope, not a substitute for the standard itself; always work to the current edition. Equipment specifications may change; performance depends on the application, how the equipment is used and operation in line with the operation manual.
Sources
ASTM International, ASTM G48-25 Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution, standard summary page.





Comments